Cisco 7304 Installation And Configuration Manual page 45

Chapter 4 Configuring the 6E3 Line Card
Checking the Configuration
Cisco 7304 Routers
Following is an example of the show version command from a Cisco 7304 router with the 6E3 line card:
WS_2_DS3_1600 #show version
Cisco Internetwork Operating System Software
IOS (tm) 7300 Software (C7300-JS-M), Version 12.2(20S)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Thu 20-Dec-03 03:25 by cva
Image text-base:0x4000878, data-base:0x42794000
ROM:System Bootstrap, Version 12.1(12r)EX1,RELEASE SOFTWARE (fc1)
Currently running ROMMON from ROM 0
WS_@_DS3_1600 uptime is 3 hours, 50 minutes
System returned to ROM by reload
System image file is "disk0:c7300-js-mz
cisco 7300 (NSE100) processor (revision E) with 114688K/16384K bytes of memory.
Processor board ID SCA0702004V
R7000 CPU at 350Mhz, Implementation 39, Rev 3.2, 256KB L2, 1024KB L3 Cache
4 slot midplane, Version 67.49
Last reset from software reset or reload
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
PXF processor tmc0 running 'system:pxf/ucode1' v1.4 is active
PXF processor tmc1 running 'system:pxf/ucode1' v1.4 is active
1 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
12 Serial network interface(s)
1 Packet over Sonet network interface(s)
509K bytes of non-volatile configuration memory.
16064K bytes of ATA compact flash in bootdisk (Sector size 512 bytes).
31360K bytes of ATA compact flash in disk0 (Sector size 512 bytes).
Configuration register is 0x0
Cisco 7304 6-Port Clear Channel E3 Line Card Installation and Configuration
4-11
OL-5061-01