Blind And Home; Park; Add And Kill; Double Preset - Chauvet TFX-48CON Technical Reference Manual

O P E R A T I N G I N S T R U C T I O N S
3. If the Segment Display reads, for example, "076", it means a percentage value 76%. If the Segment Display reads
"076", it means the DMX value 76.

Blind and Home

1. Blind function takes channels temporally out from a chase, when the chase is running, and gives you manual control
over the channel.
2. Press and hold the Blind Button and tap the relative Flash Button you want to temporarily take out of the chase.
3. To return to normal chase again press and hold the Home Button and push the Flash Button you want to return to
normal chase.

Park

1. In CHASE O P SCENES Mode, press down the button you can change the chasing mode of programs between
Single Mode and Mix Mode.
2. In Double Preset Mode, pressing down this button is equal to pushing Master slider B to the top.
3. In Single Preset Mode, this button could temporarily record current output, with Master Slider B to adjust.

Add and Kill

1. The ADD/KILL Button changes the mode of the flash buttons. Normally the flash buttons are in Add mode,
whereas pressing any flash button will not kill other scenes, allowing multiple scenes to be on at a time.
2. The Kill mode is activated by pressing the Add/Kill button and illuminating the LED above it. Pressing any flash
button will kill other active SCENE or Program.
3. In Kill mode, the killed program does not stop running but can not output.

Double Preset

1. Press Mode Select Button to enter A Double Preset Mode.
2. In this mode, Channel Sliders 1-24 and channel sliders 25-48 both control Channel 1-24.
3. Master A controls channel Slider 1-24 while Master B controls Channel Sliders 25-48.
4. In this Mode, no scene can be recorded.
Example
1. Enter the Double Preset Mode
2. Push Channel Sliders 1 to 6 to the top and move Channel Sliders 19-24 to the maximum.
3. Move Master A and B to the same level and push them to the same direction, you will get a scene.
TFX-48C Users Manual Version 2.03 19