Insert A Step Or Steps; Modify A Step Or Steps - Chauvet TFX-48CON Technical Reference Manual

O P E R A T I N G I N S T R U C T I O N S

Insert a Step or Steps

1 .
Record a scene or scenes
you wish to insert.
Be sure you're in and
CHASE SCENE Enter
the Edit mode.
Example:
EXAMPLE: Insert a step with
channels 1-12 fully on at a
time between step 4 and 5 of
program 35.

Modify a Step or Steps

1 .
STEP
Enter Edit mode.
Tap the Step button to scroll
to the step you wish to
modify.
TFX-48C Users Manual Version 2.03
2 .
STEP
Tap the Step button to scroll
to the step which you wish
to insert before. You may
read the step from the
Segment Display.
1. Record enable.
2. Push Channel sliders 1-12 to the top and record the scene as a step.
3. Tap the Mode Select button to select CHNS
4. Tap the Page button until Page 2 LED lights.
5. Tap the Flash button 35 while holding down the Edit button, the corresponding scene
LED lights.
6. Tap the Step button to scroll to the step 4.
7. Tap the Insert button to insert the scene you've created before.
2 .
DOWN UP
Press and hold the Up
button if you want to raise
the intensity. If you want to
lower the intensity, press and
hold down the Down
button.
13
3 .
INSERT
Tap the Insert button to
insert the step you've created
before, all LEDs will flash,
indicating the step is
inserted.
SCENE mode.
3 .
27 28 29
UP
3 4 5
10 10 10 10
8 8 8 8
6 6 6 6
4 4 4 4
2 2 2 2
0 0 0 0
FLASH 25-48
While holding down the Up
or Down button, tap the
Flash button corresponding
to the DMX channel of the
scene you wish to modify
until you reach the desired
intensity value read from the
Segment Display. Then you
may tap the Flash buttons
until you are satisfied with
the new scene.
4 .
Exit Edit mode.
4 .
Repeat steps 1, 2 and 3 until
all the steps have been
modified.
Exit Edit mode.