Sending Midi File Dump; Implementation - Chauvet TFX-48CON Technical Reference Manual

O P E R A T I N G I N S T R U C T I O N S

Sending MIDI File Dump

27 28 29
3 4 5
Tap this
RECORD
button
10 10 10 10
three
8 8 8
6 6 6
times!
4 4 4
2 2 2
0 0 0
FLASH 4

Implementation

1. During receiving and sending MIDI data, all MIDI scenes and channels being run will automatically paused if there
is no response within 10 minutes.
2. During receiving and sending file dump, the controller will automatically search for or send Device ID of 55h(85), a
file named DC2448 with an extension of "BIN(SPACE)".
3. File dump allows this controller to send its MIDI data to next unit or other MIDI devices.
4. Three are two types of file dump mode described as below.
MIDI OUT
MIDI OUT
5. The controller will send and receive Note On/Off data via the Flash buttons.
TFX-48C Users Manual Version 2.03
Tap the Flash button 4 three time while holding down the Record button, the Segment
Display reads "OUT" indicating the controller is ready to send a file.
NOTE:
8
1. During file dump, all other operations will not function. Functions
6
4
will automatically return when the file dump is completed.
2
0
2. File dump will be interrupted and stop if errors occur or power
failure.
Open Loop Mode
CONTROLLER
MIDI IN
Close Loop Mode
CONTROLLER
MIDI IN
NOTE NUMBER VELOCITY
Decimal Hex
22-69 [16H-45H] Program Master
22-117 [16H-45H] Channel Light
118 [76H]
119 [77H]
120 [78H]
121 [79H]
122 [7AH]
123 [7BH]
124 [7CH]
125 [7DH]
126 [7EH]
RECEIVER
MIDI OUT MIDI IN
RECEIVER
MIDI OUT MIDI IN
FUNCTION
Turn on or off program 1-48
activate Channel 1-48
FULL-ON
DARK
HOLD
Turn on or off AUDIO
CHNS SCENES
DOUBLE PRESET Mode
SINGLE PRESET Mode
Step
BLACK OUT
17