Toto Neorest NX Instruction Manual page 8

P reparation
Using the Product for the First Time
1 . I ns ert th e b attery
1
Remove the remote control from
the hanger.
Remote control
Hanger
2
Open the battery cover and insert
two AA batteries.
Close Close
Open
Battery cover
● When batteries are properly inserted,
temperature levels appear on the display of
the remote control (back side).
When the temperature levels are not
displayed, perform step 3 of "Language
Settings" in page 38.
◦The display goes out when no button on
the remote control is pressed for about 60
seconds or more.
WATER TEMP
SEAT TEMP
DRYER TEMP
3
Mount the remote control in the
hanger.
14
I f th e rem ote c ontrol is s ec u red ( f or anti th ef t)
1
Remove the screws (2, left and
right) from the remote control fixture.
( V iew f rom s id e)
Remote control
Hanger
Wall
Phillips screwdriver
Screw
(Fine-tip type)
(2 pieces, left
R em ov e
and right)
2
Remove the remote control from the
hanger.
Remote control
Hanger
Wall
■ To secure the remote control again
Tighten and fix the screws (2, left and right).
(Overtightening may cause damage to parts
such as the hanger.)
■About the batteries
◦Use dry cell, alkaline batteries.
◦Be sure to follow "Safety Precautions" to prevent the batteries
from rupturing or leaking fluid, etc.
(Page 6, 8)
2 . T u rn on th e pow er
1
Switch the breaker on the
distribution board to ON.
◦
The wand extends and then retracts.
2
Check that the "Power" LED is lit
up.
• When it is off, switch the "Power" to "ON".
T o operate f rom th e b ac k of rem ote c ontrol
Press "Power ON/OFF" button for
about 3 seconds or longer
T o operate f rom th e f ront of rem ote c ontrol
* Recommended if the remote control is locked
to prevent theft.
Press "Oscillating cleansing/
Pulsating cleansing" button about 10 seconds
or longer
<Power>
T o tu rn th e pow er " OF F "
2
Perform the same operation as Step above.
• The "POWER" LED goes off.
3 . Open th e s h u tof f v al v e
1
Remove the shutoff valve cover.
Shutoff valve
cover
2
Fully open the shutoff valve.
Opening / closing tool
(accessory) or flat-head
screwdriver
Shutoff valve
3
Install the shutoff valve cover.
15