Kirby Morgan M-48 SuperMask User Manual
Hide thumbs Also See for M-48 SuperMask:

Advertisement

Quick Links

User Guide For
M-48 SuperMask
®
Document P/N 100-800
Kirby Morgan, SuperLite, BandMask, Band Mask, KMB, KMB-Band Mask,
DSI, Diving Systems International, EXO, REX, SuperFlow and DECA are all
registered trademarks of Kirby Morgan Dive Systems, Inc. Use of these
terms to describe products that are not manufactured by KMDSI is illegal.
The two dimensional images (such as photographs and illustrations) of
our products are © copyrighted and trademarks of Kirby Morgan Dive
Systems, Inc. The three dimensional forms of our products are trademark,
trade design and trade dress protected.
© MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. This user
guide is made available for the express use of owner of this Kirby Morgan
product. No part of this user guide may be reproduced, stored in any re-
trieval system, or transmitted, or used in any form or by any means, whether
graphic, electronic, mechanical, photocopy, or otherwise by technology
known or unknown, without the prior written permission of Kirby Morgan
Dive Systems, Inc. known or unknown, without the prior written permission
of Kirby Morgan Dive Systems, Inc. known or unknown, without the prior
written permission of Kirby Morgan Dive Systems, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M-48 SuperMask and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kirby Morgan M-48 SuperMask

  • Page 1 © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. This user guide is made available for the express use of owner of this Kirby Morgan product. No part of this user guide may be reproduced, stored in any re-...
  • Page 2 IMPORTANT: Please register your purchase online at www.kirbymorgan.com/support/product-registration-form. If you have a problem with the online registration, please contact your Kirby Morgan dealer, or Kirby Morgan directly by calling (805) 928-7772, or email sales@kirbymorgan.com. Kirby Morgan thanks you for your purchase.
  • Page 3: Table Of Contents

    Communications with the M-48 SuperMask ® Installing a Communications Port Plug Dewatering and Tilt to Purge Valve Assemblies PRE-DIVE with Open Circuit Regulator PRE-Dive Inspection Donning Donning the M-48 SuperMask ® © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 4 Auto Purge Assembly Tilt to Purge Valve P/N 805-047 Adjusting Tension on Pod Hook Accessories/Spares Prescription Lenses Inlet Swivel P/N 305-017 Manifold Block Over-Pressure Relief Valve P/N 200-017 © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 5 Appendix 2 Post-Dive Cleaning and Inspection Appendix 3 Scheduled Maintenance Exploded View Drawing of the M-48 SuperMask (No Pod) ® Exploded View Drawing of the SCUBA Pod, P/N 805-015 Records Notes © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 6: Definitions Of Signal Words And Terms Used In This Guide

    If you sell or loan this equipment to another person, be sure that this user guide accompanies the gear when you transfer possession to them. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 7: Introduction

    If you have any questions or comments, please feel free to contact us. Questions on the use and care of this mask should be addressed to Kirby Morgan Dive Systems Inc. Telephone 805-928-7772 or e-mail found at www.kirbymorgan.
  • Page 8 The exploded view for the 200-120 Balanced SCUBA regulator can be found in its separate user guide, P/N 100-141. NOTE © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 9 Clean the mask using only a solution of one tablespoon of mild hand dish wash- ing soap, such as Joy or Palmolive, to one gallon of water. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 10: Ce Marking

    The name of the manufacturer On the mask frame the data reported are the following CE marking The Full Face Mask Model (M-48 SuperMask ® Harmonized reference standard EN250 © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 11: Components Of The M-48 Supermask

    NOSE PINCH POCKET HEAD HARNESS BUCKLES POD HOOKING AREA POD CATCH HOOK MOUTHPIECE CATCH/RELEASE REGULATOR TILT VALVE WATER DUMP (On select models) PURGE TUBE BALANCED POD CATCH/ RELEASE © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 12: Diving Modes

    CE certified. The maximum recommended recreational diving depth for the M-48 SuperMask with open circuit SCUBA is 130 FSW (39 msw) ® when operating under CE guidelines. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 13: Surface Supplied Open Circuit Diving Mode

    An ordinary scuba regulator first stage connected to a diving cylinder on the surface with a long hose to the mask is not an acceptable arrangement for this purpose, no matter what type of regulator is used. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 14: Minimum Equipment For Surface Supplied Diving

    Minimum Equipment for Surface Supplied Diving The minimum equipment for surface supplied diving with this mask in- cludes the following: © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 15: Demand Regulator Adjustment / Surface Supplied

    SCUBA regulator will offer the best overall performance due to the broad adjustment range of the regulator bias adjustment and the ability to make adjustments for variations in supply pressure. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 16: Pre-Dive

    The regulator mounting tube must have a single lip at the end that will be closest to the diver’s mouth. Demand regulator mouthpiece mount tubes should be at least a length of 0.5 inches/1.27 cm at the shortest measurement. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 17 A pull test (see page 22) should be performed to confirm proper at- tachment of the regulator to the POD and mouthpiece. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 18 Only the KMDSI mouthpiece P/N 810-022L will function correctly in your SCUBA pod. Do not attempt to use any other manufacturer’s mouthpiece. Doing so could result in death by drowning © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 19: Tools And Components Needed For Installation Of Regulator To Scuba Pod

    Make certain that both the mouthpiece and regulator mount tube are © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 20 (straight). Insert the mouthpiece into the pod first. The end of the mouthpiece must align evenly with the end of the mouthpiece tube on the pod. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 21 © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 22 KMDSI or Dive Lab Inc. Signs of improper function, if ignored, may lead to compromised air delivery which could lead to accidents that can cause injury or death. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 23: Regulator Hose

    The strap keepers must be removed first. Note the position of the strap keepers in relation to the mask strap before removing. We recommend replacing the strap keeper back onto the strap groove once it has been © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 24: Installation Of The Mask Strap On Mask Frame

    Follow with a light buff with a soft cloth allowing a slight residue of soap film to remain on the face port to inhibit fogging. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 25: Communications With The M-48 Supermask

    It is important to always clean and flush the purge tube, balanced or tilt to purge valve assembly after every dive; followed by an inspection for damage, tears or deterioration of assembly. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 26: Pre-Dive With Open Circuit Regulator

    Use “PRE-Dive Inspection”, in this user guide or print one out from www. kirbymorgan.com/support/checklists to ensure that a methodical inspec- tion of the M-48 SuperMask and all related gear is completed before each ® © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 27 © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 28 Because the actual nose pocket of the mask is very flexible, it allows the pocket to be moved slightly in towards the face and can also be flexed side to side to get the best possible function for equalizing. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 29 Jaw Strap. Swing the pod to the right so that the mating surface on the pod frame properly engages the mating surface on the mask frame. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 30 With either method, you may use your fingers and the palm of your hand to snap the pod Catch, Release closed by pinching the front part of the Catch, Release and the back part of the pod Catch (mask) together. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 31 BOV/DSV firmly against the face when doing a roll off or drop type entry. Once in the water, the diver should recheck mask fit, check the regulator for ease of breathing, and perform a communications check if so equipped. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 32 (5–10 feet, 1.5–3 meters, in depth) to repeat the donning and doffing drills that were prac- ticed in the dry. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 33 Once the right side of the pod is free, swing the pod to the left allowing it to completely unhinge from the mask. When removing the pod while using a demand regulator or BOV the © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 34 Be sure to begin exhala- © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 35 When using a pod with a demand regulator other than the KMDSI Balanced SCUBA Regulator your hand will be required to activate the tilt to purge found at the base of the pod frame. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 36 Inspect mask for damaged, worn, or missing parts. Dry and store mask and pod out of sunlight and fl uores- cent light, preferably in protective bag or pouch. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 37 Clean and sanitize the demand regulator/BOV/DSV in accordance with the manufac- turer’s recommendations. The mask should be transported and stored, completely dried, in the stor- © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 38 Carefully dilute germicidal cleansing solutions in accor- dance with manufacturers’ recommendation. If solution is not of the recommended strength, it will not act as an effective disinfectant. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 39 It is best for long term storage not to have the pod attached to the mask. Store the mask and pod at room temperature and out of direct sunlight. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 40 Routine cleaning and maintenance is the best way to ensure long equip- ment life and optimum performance. The following outlines scheduled maintenance procedures for the M-48 SuperMask ® © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 41 Do not attempt to push the valve body through the pod tube. Clean all components using a soft bristle brush and cleaning solution. Inspect components for damage. Replace if needed. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 42 Step 8 cannot be completed until the Kirby Morgan Balanced SCUBA Regulator is installed into the pod. See “Mounting Open Circuit Regulators” on page 16. NOTE © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 43 Using tie wrap tool or equivalent, install new tie wrap P/N 520-038 to secure tilt-to- purge valve assembly in place on pod skirt. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 44 The high flow swivel allows the regulator hose to move freely and align with the mask without putting stress on the hose coupling. It uses standard SCUBA threads for incoming breathing air. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 45 (Torque specification for installing into low pressure port of first stage regulator: 20 inch pounds). © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 46 /MOD-1 modular full face mask will have the benefit of securing their back up, bailout or decompression gas directly to the mask with the continued benefits of the modular full face mask. © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 47 This page intentionally left blank...
  • Page 48: Pre-Dive Inspection

    fi rm that the skirt in not folded under itself and sits properly on the face. Page 1 of 1 © MMXVI Kirby Morgan Dive Systems, Inc. All Rights Reserved Document # 160824001 © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 49 Dry and store mask and pod out of sunlight and fl uores- cent light, preferably in protective bag or pouch. Page 1 of 1 © MMXVI Kirby Morgan Dive Systems, Inc. All Rights Reserved Document # 160824002 © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 50 Daily semblies and strap keepers Inspect Nose clearing device Daily Page 1 of 1 © MMXVI Kirby Morgan Dive Systems, Inc. All Rights Reserved Document # 160825001 © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 51 Exploded View Drawing of the M-48 SuperMask® (No Pod) Exploded View Drawing of the M-48 SuperMask (No Pod) ® © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 52 © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 53 Exploded View Drawing of the SCUBA Pod, P/N 805-015 Exploded View Drawing of the SCUBA Pod, P/N 805-015 © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 54 Records Records Balanced SCUBA Serial Number: Date of Purchase: KMDSI Dealer: Dealer Phone Number: Dealer Email: Notes © MMXXI Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 210902001...
  • Page 55 This page intentionally left blank...
  • Page 56 1430 Jason Way, Santa Maria, CA 93455 Phone: 805/928-7772 Fax: 805/928-0342 www.kirbymorgan.com E-mail: kmdsi@kirbymorgan.com...

Table of Contents