1. Manuals
  2. Brands
  3. Kirby Morgan Manuals
  4. Respiratory Product
  5. M-48 SuperMask
  6. User manual

Kirby Morgan M-48 SuperMask User Manual

Hide thumbs Also See for M-48 SuperMask:
Table of Contents

Advertisement

Quick Links

Download this manual
M-48 SuperMask
User Guide
®
Document #110516001
Document P/N 100-800
Kirby Morgan, SuperLite
, BandMask, Band Mask, KMB, KMB-Band Mask, DSI, Diving
®
Systems International, EXO, REX
, SuperFlow
, SuperMask and DECA are all registered
®
®
trademarks of Kirby Morgan Dive Systems, Inc. Use of these terms to describe products
that are not manufactured by KMDSI is illegal.
The two dimensional images (such as photographs and illustrations) of our products are ©
copyrighted and trademarks of Kirby Morgan Dive Systems, Inc. The three dimensional
forms of our products are trademark/trade dress protected.
© Copyright 2011 Kirby Morgan Dive Systems, Inc. All rights reserved. This manual is
made available for the express use of owner of this Kirby Morgan product. No part of this
manual may be reproduced, stored in any retrieval system, or transmitted, or used in any
form or by any means, whether graphic, electronic, mechanical, photocopy, or otherwise
by technology known or unknown, without the prior written permission of Kirby Morgan
Dive Systems, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M-48 SuperMask and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Kirby Morgan M-48 SuperMask

Summary of Contents for Kirby Morgan M-48 SuperMask

  • Page 1 © Copyright 2011 Kirby Morgan Dive Systems, Inc. All rights reserved. This manual is made available for the express use of owner of this Kirby Morgan product. No part of this manual may be reproduced, stored in any retrieval system, or transmitted, or used in any...

  • Page 2: Warranty Information

    NOTE: Be sure to complete the enclosed warranty card and return it to KMDSI immediately. No warranty claims will be honored without a satisfactorily completed warranty card on file at KMDSI. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 3: Table Of Contents

    � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...
  • Page 4 Post-Dive Cleaning And Inspection � � � � � � � � � � � � � � � � � � � � � � � � © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 5: Definitions Of Signal Words Used In This Guide

    If you sell or loan this equipment to another person, be sure that this manual accompanies the gear when you transfer possession to them. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 6: Introduction

    RADIOACTIVE © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...
  • Page 7 (1) tablespoon of a mild hand dish washing detergent, such as Joy ™ or Palmolive ™, to one gallon of water. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...
  • Page 8 If you have any questions or comments, please feel free to contact us (see contact information on back cover). © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 9: Cr Marking

    All the tables reporting the technical data and the pres- sure of use are relative to compressed air. CE Marking On the lens of the mask the CE mark is printed. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 10: Notified Body

    PPE. If the mark deteriorates or is not leg- ible the user should contact the manufacturer. Notified Body The Notified Body is DNV- MODULO UNO S.c.a.r.l. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 11: Cleaning Procedures

    Carefully dilute germicidal cleansing solutions in ac- cordance with manufacturer’s recommendation. If solution is not of the recommended strength, it will not act as an effective disinfectant. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 12: Germicidal Solutions Manufacturers

    Control Technology ): Ready to use. Infection Control Technology 1751 So. Redwood Rd. Woodscross, UT 84087 USA 1-800-551-0735 P/N: BP201 (4 ounces) or BP 222 (32 ounces), Infec- Bi-Arrest 2: © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...
  • Page 13 Deep diving increases your risk of decompression sick- ness and possible other diving injuries. KMDSI does not recommend recreational diving deeper than 164 feet of seawater (50 meters), or beyond the no-decompression limits. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 14: Components Of The M-48 Supermask

    SuperMask with open circuit scuba is 130 FSW (39 msw). Surface-Supplied Open Circuit The SuperMask can be used for surface-supplied diving when used with a surface-supplied diving system. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...
  • Page 15 Using the SuperMask is very easy, but as with all new equipment, training and practice is the key to enjoyable diving. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 16: Minimum Equipment For Surface-Supplied Diving

    The diver can also use the adjustment knob when working in various positions or current. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 17: Regulator Hose

    It is highly recommended that all donning, doffing, pod removal, and replacement procedures be practiced on the surface in a dry environment, regularly and often, be- fore attempting the same procedures in the water © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 18: Mounting Open Circuit Regulators

    If your mask was not supplied with a KMDSI regulator installed by the factory, you will need to have an acceptable regulator installed in the pod on your M-48. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...
  • Page 19 Do not use regulators that have a mouthpiece tube that have a double lip at the end of the tube closest to your mouth, as illustrated at the left. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...
  • Page 20 It is possible to Trim notch trim the mouthpiece to a shorter length. Using scissors, carefully shorten the mouthpiece at the trim edge notch. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 21: Installation Of Regulator

    2. Carefully inspect the regulator or DSV for sharp edges, and ensure the length and dimensions of the mouthpiece attachment point meet the requirements as shown previously. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...
  • Page 22 Insert the mouthpiece into the pod. NOTE: Installation of the long mouthpiece (P/N 810-022L) will ensure conformance to the CO2 allowable dead space, CE/EN250. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...
  • Page 23 Use of a weaker tie wrap could allow the regulator to pull out of the pod. This could lead to flooding of the pod and drowning. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...
  • Page 24 B WARNING A properly secured mouthpiece and regulator/DSV should be able to withstand a pull force of at least 34 lbs. (150 Newtons). © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 25: Pre-Dive Inspection With Open-Circuit Demand Regulator

    DSV is secure • Check the regulator assembly for proper operation per the manufacturer’s recommendations. • Check the dewatering “tilt” valve for proper function. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 26: Cleaning The Face Port And Interior Surfaces

    © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...
  • Page 27 5) Lightly tighten the lower head harness straps. Do not over tighten. The mask should fit snug, but should be comfortable. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 28: Connecting The Pod To The Mask

    Ensure that the pod is snapped onto the second tooth of the latch catch (two clicks), © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 29: Alternate Method Of Connecting The Pod To The Mask

    Release and the back part of the hook together. Ensure that the pod is snapped onto the second tooth of the latch catch. This method can be of help when wearing heavy gloves. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 30: Diving With A Hood

    At this point, normal breathing using the mouthpiece can resume but the lower cavity should be dewatered by tilting the tilt purge stem, releasing the mouth piece and exhaling forcefully or by depressing © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 31: Alternate Method Of Removing/Replacing Pod Underwater

    The higher pressure created in the eye cavity forces the water down through the upper lip in the same manner as clearing a standard scuba mask. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 32: Releasing The Pod

    Squeeze the front and the back parts of the latch together to release the pod from the mask. Swing the pod forward and to the left to release the pod hook from the mask. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 33: Removing The Mask

    The mask should be transported and stored in the storage bag with the pod removed to keep the frame from taking a set. Follow the manufacturer’s © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 34: Conservation Storage Conditions

    This manual provides properly trained personnel with the guidance and technical information needed to perform normal scheduled maintenance and adjustments as described herein. Repairs and overhauls must be completed by SuperMask authorized / trained technicians. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 35: General Disassembly Guidelines

    NOTE: For the following procedures, the SuperMask should already be completely disconnected from the breathing system. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 36: Post-Dive Cleaning And Inspection

    View Drawing of the KMS-48 SuperMask” on page 43. NOTE: Before scheduled maintenance is performed, all components should be thoroughly cleaned in accordance with the procedures found “Cleaning Procedures” on page 11. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 37: Head Harness Removal And Installation

    In almost all cases, you will need to open up one of the communications ports, which are located below the bottom edge of the mask frame. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 38: Soft Pods (Uba And Scuba)

    Place in ultrasonic cleaner using cleaning solution for 10 minutes. Re-clean with soft bristle brush if needed. 3. Inspect component for damage. Replace if needed. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 39: Installing A Communications Port Plug

    Install the Communication Port Plug as shown, curved side towards the diver’s face. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 40: Buckle Options

    The SuperFlow First Stage (P/N 305-161) and Second Stage (P/N 305-166) Regulators have been designed to be used with the SuperMask. They are high-quality, high-performance regulators. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 41: Accessories For The M-48 Supermask

    CE approved for the M-48 with CE approved regula- tors. The Inlet Swivel is provided with the purchase of a SuperMask w/second stage regulator, P/N 800-050 © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 42: Manifold Block

    “creeping” first stage. Without this valve, the intermediate pressure hose would burst and the diver would lose his entire emergency gas supply. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

  • Page 43: Exploded View Drawing Of The Kms-48 Supermask

    KMDSI. When ordering spares, always insist on Kirby Morgan original parts. © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001 © Copyright 2011 Kirby Morgan Dive...
  • Page 44 M-48 SuperMask User Guide Notes Note: Not all SuperMask parts are available for purchase. Parts available for purchase are indicated with an asterisk * © © Copyright 1970-2011 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 110516001...

Table of Contents