Energy Save Mode - Sharp R-772M Operation Manual With Cookbook

Your oven has an Energy Save Mode. This facility saves electricity when the oven is not in use.
When you have unpacked your oven and assembled the turntable correctly (please refer to pages 2 & 4)
plug the oven into your electricity supply. Open & close the door. "0" will appear on the display. The oven
is now ready for use.
The oven will default to Energy Save Mode after 2 minutes if not used. In Energy Save Mode the display is
blank and the oven cannot be operated.
To cancel Energy Save Mode:
i) Open & close the door. "0" will be displayed and the oven is ready for use.
ii) Set the clock. Please refer to "Setting the clock" on page 6. (To revert back to Energy Save Mode,
follow the procedure below).
Note: If you unplug your oven at any stage you will have to reset the clock to cancel Energy Save Mode.
To start Energy Save Mode when the clock is set.
1. Make sure
the correct
time appears
on the display.
2. Press the AUTO 3. Press the START/AUTO
START/CLOCK
key twice.
AUTO START
CLOCK
x2
"PRESS START TO SET

ENERGY SAVE MODE"

will appear in the
display.
ENERGY SAVE MODE
MINUTE key. The
power will be off and
the display will show
nothing.
START
AUTO MINUTE
x1
7