Product Specific Safety Instructions; Symbol Definitions - Pacvac Hydropro Series Product & Training Manual

Commercial wet and dry vacuum cleaners
Hide thumbs Also See for Hydropro Series:
Table of Contents

Advertisement

Product Specific Safety Instructions

1. WARNING This machine is intended for the
vacuuming of liquids as well as wet or dry dust
and debris off carpeted or hard floor surfaces in
indoor areas only.
2. WARNING Do not use the machine for suction
of dry dust and debris without filters in place.
The use of paper or polyester dust bags is
optional.
3. WARNING Remove polyester filter and dust
bag (if using) and ensure foam filter is in place
before use for suction of liquid.
4. Check the position of the filter and fastening
of latches. Incorrect filter positioning can
cause diminished performance and/or serious
damage to the machine.
5. The machine features a floating valve that
interrupts the vacuum when the tank is full.
In the event of a total loss of suction, turn the
machine off, turn the power outlet off, unplug
the machine and empty the tank.
6. Weekly clean the polyester filter by brushing off
or washing, however ensure it is completely dry
before reinstalling.
7. CAUTION Take extra care if using this vacuum
cleaner to clean stairs.
8. The following models have a "A-weighted
emission sound pressure level (measured at 1.5
meters) of:
Hydropro 21 - 76 dB(A)
Hydropro 36 - 72 dB(A)
Hydropro 76 - 75 B(A) / 73dB(A) wispa mode
RETAIN THESE SAFETY INSTRUCTIONS FOR FUTURE USE.

Symbol Definitions

1. Attention!
Hydropro series
9. Brush and Attachment Use Part No. FLT003/
FLF003/FLF004 - Dry Floor Tool is intended
for vacuuming of dry dust and debris off floor
surfaces.
10. Part No. FLT011/FLF005/FLF006 - Wet Floor
Tool is intended for vacuuming of liquid or wet
dust and debris off floor surfaces.
11. Part No. ACC001/ACC004 - Dusting Brush is
intended for vacuuming of liquid or dust and
debris from delicate surfaces.
12. Part No. ACC002/ACC005 - Crevice Tool is
intended for vacuuming of liquid, dust and
debris from crevices.
13. Part No. ACC003 - Upholstery Tool is intended
for vacuuming of liquid or dust and debris from
upholstered surfaces.
14. This appliance and attachments should be
packed in double wall corrugated cardboard
boxes with dimensions of approximately:
Hydropro 21 - 41cm x 41cm x 58cm
Hydropro 36 - 41cm x 41cm x 77cm
Hydropro 76 - 60cm x 59cm x 105cm
2. Operator's Manual; Operating Instructions
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hydropro 21Hydropro 36Hydropro 76

Table of Contents