Page 1
Commercial Back Pack Vacuum Cleaner Support: +61 8 9479 1444 www.pacvac.com Read the instruction manual before using the machine. Retain for future reference. Original Instructions...
This Manual applies to the Thrift 650 model: Contents General Safety Instructions Page 2 Product Specific Safety Instructions Page 3 Symbol Definitions Page 3 Patents Page 3 Wear Right Page 4 Operate Right Page 5 Work Right Page 6 Safety and Maintenance Checks...
If the machine is without a data plate, contact the power cord must be replaced by your local place of purchase immediately. authorised Pacvac Service Centre in order to avoid an electric shock. The power cord should only be 9. Do not restrict the vacuum cleaner’s airflow.
The Regulatory Compliance Mark (RCM) indicates a bag and filters in place. device’s compliance with all applicable ACMA regulatory arrangements. 4. The Thrift has an “A”-weighted emission sound \ pressure level of 66 ± 3dB(A) (measured at 1.5 meters) 5. Floor Tool Operator’s Manual;...
• Adjust position and connect chest strap to secure back pack. Step 4: • Make sure the harness is resting on your hips. IMPORTANT If the back pack feels heavy or uncomfortable, it is likely you are not wearing it correctly. Contact Pacvac for further advice.
1 Reusable Dust Bag Bags Remove the machine from packaging and ensure it and all its accessories and attachments are present and in perfect condition. Contact the place of purchase immediately in the event of any discrepancies. www.pacvac.com Support: +61 8 9479 1444...
Work Right LOOK AT THE LAYOUT (refer to the Fishbone Method below) • Find the most easily located power point. This is your starting location at the fish’s head. Your turnaround is the ‘tail’ . • Check the room layout (position of desks, tables, chairs, fittings etc.) •...
Check the floor tool, wand, bent hand piece and hose for any obstructions. WEEKLY Remove and clean external motor filter. NOTE: Any other servicing should be performed by an authorised technician. REV : JUN 10 www.pacvac.com Support: +61 8 9479 1444...
Our products are designed and built to be functional and durable. For information on use and maintenance please read the Product & Training Manual thoroughly. Should you require servicing contact your nearest authorised Pacvac Service Centre. www.pacvac.com +61 8 9479 1444...
Pacvac components or has not been used and maintained as indicated in the Product and Training Manual. • Warranty repairs can only be carried out by an authorised Pacvac Distributor or Service Centre. Visit our website or call Pacvac for your nearest location. •...
38. Metal bent hand piece UA913M 39. Extension cord 20m 10A 3c 1mm² (AU, NZ) KC11120 40. Extendable wand KC909 Technical specifications, part numbers and parts profiles are subject to change without notice. Optional Extras www.pacvac.com Support: +61 8 9479 1444...
Page 16
Service & Help For service and help contact Pacvac on +61 8 9479 1444 or email support@pacvac.com Alternatively visit our website at www.pacvac.com for a list of your nearest Retailers and Service Centres. PACVAC PTY LTD Revised: August 2016 650TH - M - 160831...
Need help?
Do you have a question about the THRIFT and is the answer not in the manual?
Questions and answers