Midi Operation - Chauvet DMX-40A User Manual

Midi Operation

The controller will only respond to MIDI commands on the MIDI channel which it is set to full stop. All
MIDI control is performed using Note on commands. All other MIDI instructions are ignored. To stop a
chase, send the blackout on note.
Action 
1) Press and hold the Midi/Add button Until
the third and fourth digits on the LED
display blink.
2) Select the MIDI control channel (1~16) via
the BANK UP/DOWN buttons to set.
3) Press and hold the Midi/Add button to store
midi setup settings.
MIDI
NOTE
00 to 07
08 to 15
16 to 23
24 to 31
32 to 39
40 to 47
48 to 55
56 to 63
64 to 71
72 to 79
80 to 87
88 to 95
96 to 103
104 to 111
112 to 119
120
121
122
123
124
125
126
DMX-40A User Manual
F (TURN ON/OFF)
UNCTION
Scenes 1~8 in BANK 1
Scenes 1~8 in BANK 2
Scenes 1~8 in BANK 3
Scenes 1~8 in BANK 4
Scenes 1~8 in BANK 5
Scenes 1~8 in BANK 6
Scenes 1~8 in BANK 7
Scenes 1~8 in BANK 8
Scenes 1~8 in BANK 9
Scenes 1~8 in BANK 10
Scenes 1~8 in BANK 11
Scenes 1~8 in BANK 12
Scenes 1~8 in BANK 13
Scenes 1~8 in BANK 14
Scenes 1~8 in BANK 15
Chase 1
Chase 2
Chase 3
Chase 4
Chase 5
Chase 6
BLACKOUT
15
Operating Instructions
Notes 
This is the Channel that the controller will receive
MIDI note commands.
Revised: 2006-01-04 14:52:58