Adding A Step To A Chase; Delete A Scene/Step In A Chase; Delete A Chase - Chauvet DMX-40A User Manual

AD D I NG A ST E P T O A C H AS E
Action 
1) Press and hold the PROGRAM button for 3
seconds to enter programming mode.
2) Press the desired CHASE (1~6) button.
3) Press the TAPSYNC/Display and the LCD
will display the scene and bank number.
This displays the scene you will be adding.
4) Press the TAPSYNC/Display again and the
LCD will display the chase you previously
selected.
5) Use the BANK UP/DOWN buttons to scroll
through the chase and arrive at the step
number for which you would like to add or
append a scene/step to.
6) Press Midi/Add button and one step
number will be added to the previously
displayed step number.
7) Press the SCENE button that corresponds
to the scene to be copied.
8) Press Midi/Add button again to add the
new step.
9) Press and hold the PROGRAM button for 3
seconds to exit programming mode.
DE L ET E A S C E N E /ST E P IN A C H AS E
Action 
1) Press and hold the PROGRAM button for 3
seconds to enter programming mode.
2) Press the desired CHASE (1~6) button that
contains the scene to be deleted.
3) Press the TAP DISPLAY button to switch
the LCD display to steps.
4) Select the scene/step to be deleted using
the BANK UP/DOWN buttons.
5) Press AUTO DEL button to delete the
step/scene.
6) Press and hold PROGRAM button for 3
seconds to exit.
DE L ET E A C H AS E
Action 
1) Press and hold the PROGRAM button for 3
seconds to enter programming mode.
2) Press the CHASE button (1~6) to be
deleted.
3) Press and hold AUTO DEL button and the
respective CHASE button then release to
delete the chase. All LEDs will blink 3 times.
DMX-40A User Manual
Notes 
Notes 
Remember that we use scene and steps
interchangeably.
Notes 
Scenes will remain programmed on the controller.
Only the chase is affected.
12
Operating Instructions
Revised: 2006-01-04 14:52:58