Chase Programming; Create A Chase; Copy Bank Into Chase - Chauvet DMX-40A User Manual

Chase Programming

A chase is created by using previously created scenes. Scenes become steps in a chase and can be
arranged in any order you choose. It is highly recommended that prior to programming chases for the
first time; you delete all chases from memory. See "Delete All Chases" for instructions.
CR E AT E A C H AS E
A Chase can contain 240 scenes as steps. The term steps and scenes are used interchangeably.
Action 
1) Press and hold the PROGRAM button for 3
seconds.
2) Press the CHASE (1~6) button you wish to
program.
3) Change BANK if necessary to locate a
scene.
4) Select the SCENE to insert.
5) Tap the MIDI/REC button to store. All LEDs
will flash 3 times.
6) Repeat steps 3 ~ 5 to add additional steps
in the chase. Up to 240 steps can be
recorded.
7) Press and hold the PROGRAM button for 3
seconds to save the chase.
CO PY B AN K I NT O C H AS E
Action 
1) Press and hold the PROGRAM button for 3
seconds to enter programming mode.
2) Select the BANK to be copied using the
BANK UP/DOWN buttons.
3) Press MUSIC/BANK COPY and Midi/Add
buttons at the same time to copy.
4) Press and hold the PROGRAM button for 3
seconds to exit programming mode.
DMX-40A User Manual
Notes 
Notes 
11
Operating Instructions
Revised: 2006-01-04 14:52:58