Advertisement
The application example is valid for:
Safety module
SM100
Product series
Servo Drives 9400
The HB-37350-810-01-16F-DE installation manual for the SMX 11 has been used.
The user must ensure that the latest application example version is used. The current application
example version can be downloaded from the Application Knowledge Base.
Safety information / disclaimer:
The safety application and parameterisation notes are examples of
possible subfunctions in machines.
The T10
indicated if a B10
years.
Commissioning is prohibited until the machine has been checked in
accordance with the regulations set out in the relevant EU directives / national
laws.
The safety instructions contained in the technical documentation must be
observed.
Using the examples does not exempt the user from careful project planning.
For possible damages and consequential damages Lenze assumes no liability to
the extent permitted by law.
Copyright 2019 Lenze Automation GmbH
Doc. ID
200909213
Date
19.07.2019
Type designation
E94AYAB
Type designation
E94AxHExxxx
value according to DIN EN ISO 13849-1, Annex C.4.2 is only
D
value is available and the operating time is less than 20
D
Page 5 out of 5
SM100_SS1_SMX_11_PL_e_en.pdf
From
hardware version
VA
From
hardware version
VA
Doc. version
1.3
From
software version
-
From
software version
1.49
Advertisement
