Activating Password Mode; Control Via External Dmx - Chauvet COLORado 3 User Manual

[Reset to factory settings]
This function will reset all the settings to the factory defaults except for [Custom] programs.
Factory Default Settings
Setting
[Schedule]
[Wash program]
[Effect program]
[DMX address]
[Range]
[Allow edit]
[Password ON/OFF]
[Set password]

Activating password mode

Set [Password] function to [ON]. This will prompt the user for a password every time the
controller is powered on.
Toggle to [Set password] function in order to change the password.
Input an 8 digit password using the [UP] & [DOWN] keys. Press the [SET] button to confirm.

Control via external DMX

Programs in the controller can be accessed via an external DMX controller. It will be necessary to
have the DMX address set on the COLORado Controller. The controller operates on 4 channels of
control.
DMX Channel Values
C
HANNEL
1
2
COLORado™ 3 User Manual
Default
All times in schedule are reset to [00:00]
Step times and fade times are reset to [001]
Speeds are reset to [001]
DMX address is reset to [001]
Range is reset to [066]
Reset to [Yes]
Password is reset to [OFF]
Password is reset to [00000000] Down=0, Up=1
Note In the event that the user forgets the password use the following factory
password override:
[UP] [DOWN]
V F
ALUE UNCTION
000 010 Blackout
011 030 Wash [1]
031 040 Blackout
041 060 Wash [2]
061 070 Blackout
071 090 Wash [3]
091 100 Blackout
101 120 Wash [4]
121 130 Blackout
131 150 Wash [5]
151 160 Blackout
161 180 Wash [6]
181 190 Blackout
191 210 Wash [7]
211 220 Blackout
221 255 Wash [8]
000 010 Blackout
011 030 Effect [1]
031 040 Blackout
041 060 Effect [2]
061 070 Blackout
071 090 Effect [3]
091 100 Blackout
101 120 Effect [4]
121 130 Blackout
131 150 Effect [5]
151 160 Blackout
161 180 Effect [6]
[UP] [DOWN] [UP] [UP]
24
Operating Instructions
[DOWN] [DOWN]
8/1/2007 10:30 AM