Normal
Mode
DMX Address
Control Activation
Self-test
Fixture Hours
Lamp
Reset
Offset Mode
Entering Offset
Mode
Color Offset
Effect Offset
Dimmer Offset
Exiting Offset
Mode
Followspot 1200 Quick Start Guide Rev. 3
1) Go to MENU > Addr and press <ENTER>
2) Select a starting DMX address (001~512)
1) Go to Menu > b_co and press <ENTER>
2) Change the setting with <UP> or <DOWN>
3) Press <ENTER> to save the new value, or press <MENU> to exit
1) Go to Menu > test
2) Press <ENTER> to start the tests
3) Press <ENTER> to suspend the test, or press <MENU> to exit
1) Go to Menu > Fhrs
2) Press <ENTER> to see the number of hours, or press <MENU> to exit
1) Go to Menu > LAMP and press <ENTER>
2) Change the setting (On/Off) with <UP> or <DOWN>
3) Press <ENTER> to save the change.
1) Go to Menu > rSet and press <ENTER>
2) After a few seconds, all DMX channels will return to their default settings.
1) Press <MENU> for five seconds.
The display will show the first offset mode function.
1) Go to Menu > oCoL and press <ENTER>
2) Change the setting (-127~127) with <UP> or <DOWN>
3) Press <ENTER> to save the change.
1) Go to Menu > oCoL and press <ENTER>
2) Change the setting (-127~127) with <UP> or <DOWN>
3) Press <ENTER> to save the change.
1) Go to Menu > oCoL and press <ENTER>
2) Change the setting (-127~127) with <UP> or <DOWN>
3) Press <ENTER> to save the change.
1) After you are done, wait eight seconds for the display timer to activate.
The display will show the current DMX address.
Operation
11