Custom Program; Play Schedule; Clock; Schedule - Chauvet COLORado 3 User Manual

Custom Program

Select from the eight existing [Custom] programs and it will instantly play.
Enter the [Edit] section to create or edit program.
You can create or edit up to 100 scenes. To omit a scene from execution set its [Step time] to 0.
Select the ID address of the target unit. Setting ID address to 0 selects all units in the serial link.
Color/Effects combination for different IDs is allowed.
Specify the [Module] or modules to run active.
0 = 1,2,3
1 = 1
2 = 2
3 = 3
4 = 1,2
5 = 2,3
6 = 1,3
RGB mix using the [Red], [Green] and [Blue] functions and adjusting the range between 0 and
255.
Select a [Strobe] speed from 0-20Hz if desired.
Select the [Step time] for the current scene.
Step time unit values
Range 0 – 10
Range 11 – 255
Set a [Fade time] for the current scene in one second increments from 0 to 255.

Play Schedule

Simply activate this menu [Play schedule] to run.

Clock

[Clock]
[Clock]

Schedule

There are 24 Wash, Effect and Custom programs that can be set with Start and End times. Start
times take priority over End times. Programs will not overlap. Programs with the most recent Start
time will always override the existing previously executed program.

Settings

[DMX address]
This function sets the DMX address for the controller. It is addressable from 1 to 250.
[Range]
Enter the number of fixtures connected in series.
[Allow edit]
This function either enables or disables editing in Wash, Effect and Custom programs.
[Detect device]
This is the manual method of detecting and connecting the controller to all new units in series. It is
generally used when you add more units to an existing system. Turning off and then on the controller
has the same effect.
COLORado™ 3 User Manual
= 0.1sec per unit
= 1 sec per unit
[Time now]: To view the current time on the controller.
[Edit now]: Edit the time and date.
23
Operating Instructions
8/1/2007 10:30 AM