Chapter 9. Reset To Default Settings; Applicable Model : Ix Auto - Apex Digital iX Series Service Manual

Chapter 9. Reset to Default Settings

Applicable Model : iX Auto

Step 1: Plug in the adopter and press the
Step 2: Rotate the
start the Reset to Default. While the Reset to Default is completed, the LCD will show the icon of
done.
Step 3. Remove the adopter and plug in the adopter again. LCD display should show the icon of APAP mode
at the lower right corner.
button to select the menu Reset to Default, and then press the
button and enter into Engineer Mode.
button to