Sd Module - Apex Digital iX Series Service Manual

6-4. 4G & SD Module
Applicable Model : IX Sense ( SD Module ) / IX Auto (4G/wireless+ SD Module )
Disassembly Steps:
1. Remove the 4 screws under the bottom and then the top cover can be separated <Refer to 6.1>.
2. Squeeze both sides of the screen bracket and make 2 buckles under the screen separately.
3. Remove the FFC cable.
4. Pull up the mainboard upward and make sure the sensor tube should be separated from the device.
5. After turning to the backside, remove all the cables that are under the mainboard ( Heated
Humidifier / Blower / DC cord ).
6. Finally, after removing the 4G module cable, the mainboard can be removed.