Apex Digital iX Series Service Manual page 55

Enter into the Setting mode and select
Step 5 ( for
About to verify if software version is
iX Auto only)
displayed.
<
SD card function applied for IX series 9S-015040 and 9S-010600>
Steps
Plug the power connector into the rear of
the device. Connect one end of the power
Step 1
cord into the power supply unit and the
other end into the power outlet.
Open the SD card cover and push in the SD
Step 2
card
Wait for a few seconds for loading the SD
card and check if the icon of SD card
Step 3
displaying on the main screen.
Description
<The picture is only for reference>.
Reference
iX Auto
iX Sense
<The picture is only for reference>