Series Functional Verification - Apex Digital iX Series Service Manual

7-5 iX Series functional verification
After replacing any electrical components, the following test processes will instruct you on verifying the
functions to ensure the device works properly.
WI-FI functions < applied for IX series 9S-010600 and 9S-010620 >
Steps
Plug the power connector into the rear of
Step 1
the device.
Press the Start Menu
Step 2
Setting mode.
Turn on the Wi-Fi function and also make
Step 3
sure that Airplane Mode is off.
Back to the main screen and make sure
that the icon of Wireless signal will display
Step 4
at the top of your screen
Enter into the Setting mode and select
About to verify if software version is
Step 5
displayed.
Description
, and select the
Reference