Table of Contents
Advertisement
Segment Display Configurations {Led}
The LED segment display can be set to off after 8 seconds of no menu activity. The LED will display again
as soon as the menu is accessed by pressing any of the buttons.
T URNI NG T H E D I SP L AY O F F {L E D}
Tap the MENU button until the display reads .
1)
2)
Press the ENTER button to select this function. The selection is confirmed when the display begins to
blink. You must make a selection within 8 seconds.
3)
Press the (-) and (+) buttons to toggle between the {on} and {off} setting.
4)
Press the ENTER button to activate selection.
5)
Note! This configuration is set on an individual fixture basis.
Fixture Test and Service Functions {FAdJ}, {teSt}, {FhrS}, {rSet}
F O CU S AD J U ST M ENT {F AD J }
The focus adjustment tool activates a pre-set program that turns the lamp on with no color.
Tap the MENU button until the display reads .
1)
2)
Press ENTER and the display will blink.
3)
Adjust the lamp focus/optimization as described in the "Lamp Section".
4)
Press the MENU button to leave this mode.
F I XT UR E S EL F- T E ST {T E ST }
The test sequence will run through all of the projection capabilities of each individual fixture, including gobo
and color effects.
Tap the MENU button until the display reads .
1)
2)
Press ENTER and the fixture will immediately begin to play back a test sequence. Observe tentatively
for any abnormalities.
3)
Press the MENU button to leave this mode.
F I XT UR E R E S ET { R S ET }
This function will re-initialize the fixture by returning all motors to its startup positions or otherwise known
as (home position).
Tap the MENU button until the display reads and press ENTER.
1)
F I XT UR E HO UR S {F H RS }
The (fixture hours) readout displays the number of hours the fixture has been in use. It is not uncommon to
find new fixtures with a few logged hours. This means the fixture was thoroughly tested prior to delivery.
Tap the MENU button until the display reads .
1)
2)
Press ENTER to view the total working hours.
3)
You can leave alone and the display will return to the regular menu or press MENU button to return to
main menu.
ART-150W & ART-252W User Manual
13
Operating Instructions
2005-01-31/12:52
Advertisement
Table of Contents
