Electrical Connection With Radial Terminal Boxes; Connecting The Supply Cable; Ill. 5 Connecting The Supply Cable - Baumer Hubner microGen HMG10 SSI Operating Manual

6 | Electrical installation
6.8

Electrical connection with radial terminal boxes

6.8.1

Connecting the supply cable

NOTICE
Equipment damage due to dust or moisture
Inappropriate cable diameters may entail ingress of dust or moisture. In this case, the protection
class is no longer ensured causing device failure or malfunction.
a) Use only appropriately sized cables to make sure the specified protection class is being en-
sured.
INFO
Connection cables are not included in delivery.
Ill. 5: Connecting the supply cable
1
3
5
30
5
Torx / slotted screw M4x32 mm
Cable gland M20x1.5 mm for cable di-
ameter 5...13 mm
Cable shield
Operating Manual
4
2 Terminal box cover
4 Connection terminals (wire cross-sec-
tion ≤ 1.5 mm
Baumer Hübner
2
HMG10 & HMG10P SSI | V1, T1
1
2
3