RGBlink Flexpro 8 Quick Start Manual page 41

Display
separate display area switching
and select the Display Area
Slide Disply to ON , Click
when users need to switch scene from eg. Bank 1 to Bank 2 but want to keep Display Area 2 and 3
the same as Bank 1. Follow the steps below to do the setting.
Step1: click Bank 2 and open Display Area
Step 2: click the icon behind to cancel the display area of 2 and 3 and click to
confirm,
Step 3:TAKE or Cut
Keep|Swap
Only when separate Display switching is OFF can Keep|Swap work.
Under the Keep status, users need to select a bank and use Cut or Take to switch image from PST
to PGM.
Under Swap status, users select a bank, then use Take or Cut to swap this bank and the bank
before this one.
© Xiamen RGBlink Science & Technology Co., Ltd.
40 / 50
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com