RGBlink Flexpro 8 Quick Start Manual page 24

2.2 When 2K HDMI port is select, users can do setting of Property and EDID
2.3When 12G SDI port is select, users can do setting of Property , DSK, LOGO and Source Merge.
2.3.1 DSK Setting：
Input Port:Current Port
Preset： Customize,White on Black 1,White on Black 2,Black on White 1,Black on White 2,Green on
Black 1,Green on Black 2,Green on White 1,Green on White 2,Red on Black 1,Red on Black 2,Red
on White 1,Red on White 2
DSK Setting switch：On or Off
Operation Mode：0 or 1,automatically show according to user's Preset choice
Transparent：0-255,automatically show according to user's Preset choice
Red,Green,Blue Max：0-255,automatically show according to user's Preset choice
Red, Green Min：0-255,automatically show according to user's Preset choice
2.3.2 Logo
Input Port：Current Port
Select Logo capture or Set Logo
Logo Catpure
Logo ID：select from Logo1-Logo10
Slide to enable Logo capture
Set Logo
© Xiamen RGBlink Science & Technology Co., Ltd.
23 / 50
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com