wallas 3008 Manual page 9

Pause Mode (in Thermo Control Mode only)
Pause Mode automatically turns the heater off if the temperature remains +2 C° (3,6 F°) above the set level for 1/2 hour
due to local ambient conditions. Pause Mode can be delayed temporarily by slightly increasing the target temperature.
Power can be turned on by increasing the target temperature in the Pause Mode.
If the heater is in Pause Mode,
Paused will appear on the screen.
Heater will re-start heating again
automatically, if the cabin temperature
falls 2 degrees C (3,6 F°) below the set
target temperature.
Shut down
Option 1 Quick shut down: Press
and hold the Select Button down for
more than 4 seconds. Stopping will
appear and the Power Icon light will
change to white indicating the unit is
off.
Option 2 Alternatively use
the Arrow Buttons to move
the selection square to the
Start/Stop Icon and press
the Select Button.
- 7 -
Press and hold the Select
Button down for more than
2 seconds.
Stopping will appear and the
Power Icon light will change
to white indicating the unit is
off.