wallas 3008 Manual page 8

Air Boost
Air Boost maximizes the air volume for quick defrosting and drying, but does not change the set temperature, power
level of fuel rate. Air Boost can be activated either in Manual or Thermo Control Mode, while the system is heating.
Use Arrow Buttons to
move the
selector to the Air
Boost icon
and press the Select
Button.
Ventilation mode
Ventilation Mode blows fresh air without heating at 6 blower speeds. Choose Ventilation Mode prior to starting the
device.
Use the Arrow Buttons to
move the selection square to
the Main Menu Bar and
press the Select Button to
activate it. Use Arrow
Buttons to choose
Ventilation Mode and press
the Select Button.
The orange Air Boost On
icon will appear.
Move the selection square to
the Start/Stop Icon and
press the Select
Button once. Press the
Select Button down again
for 2 seconds to confirm and
start the heater. Yellow
Power On
light will appear in the Info
Bar.
To go back to normal air
volume, choose the Air
Boost icon again and press
the Select Button.
Choose the blower speed
(1-6) by moving the
selection square to
the Blower Speed and
press Select Button to
activate the field.
- 6 -
The Air Boost icon will
change to white.
Press Arrow Buttons to the
desired power and press the
Select Button to choose.
To deactivate ventilation,
turn the heater off. Re-start
in the desired mode.