wallas 3008 Manual page 18

Connections tips:
1. Read from your mobile device user guide how connections and WiFi connections are managed in your device.
2. Make sure that local connections and WiFi are allowed in you mobile device (flight mode is OFF).
3. Your mobile device is not in power save mode and location permission is given to Wallas application.
4. Check that heater is connected into power and Control panel is connected into heater.
5. Distance between Mobile device and Control Panel is not too long.
6. Control Panel is not in used by other person. Only one local connection is possible at a time.
7. If your mobile device has already connection into heater it can not create new before old connection is removed from
your device. In some phone models this has to be made manually. Remove "WALLAS OP" from your phones paired
short range wireless connection devices list (note there might be several OP pairings in mobile device list, remove all)
and restart short range wireless connection before new pairing is possible. This may be the case if control panel pairing
code only blinks fast and your mobile device is repeating the connection requests.
8. Change connection to other Wallas heater.
close Wallas remote application
remove old connections from your mobile device short range wireless connection paired devices list. Restart
your devices short range wireless connection
if there is no other users for new Wallas heater you can select Control panel menu
Settings/Connections/Remove all
restart application
when/if "Change Device " link appears (30-60 sec) press the link
wait connection procedure to finalize
9. In some phone models Pairing request will open in background info window. ( See your mobile devices user guide.)
- 16 -