wallas 3008 Manual page 7

Ignition
To start, use the Arrow
Buttons (left or right) to
move the orange selection
square to the Start/Stop
Icon and press the Select
Button.
Temperature/Power setting
In Thermo Control Mode,
move the selection square
to the Target Temperature
and press the Select
Button.
Confirm the selection by
holding the Select Button
down for 3 seconds (safety
feature).
Press Arrow Buttons (left
or right) to set the desired
target temperature.
Starting will appear on the
screen.
In Manual Mode, move the
selection square to the
Power Level and press
the Select Button.
- 5 -
The light orange combustion
light will light up when the
burner flame has been
ignited and the combustion
has stabilized (in about 5
min). Heater will be fully
operational about 10
minutes later.
Use Arrow Buttons to set
the desired power level
(1-6). Confirm by pressing
the Select Button.