AEG DVD 4612 HC Operation Manual page 46

Themen Setting up and connecting
Setting up
Wall Installation
Remote control
battery installation
46
DVD4612HC_GB.indd 46 DVD4612HC_GB.indd 46
1. Attach the foot as shown.
2. Screw the foot on to the bottom of the device.
3. Then attach the wooden foot.
4. Place the player on a stable, heat resistant, horizontal and level surface.
Keep a distance of at least 10 cm from walls and objects.
5. Connect the device to a properly installed power socket.
It is also possible to install this device on the wall. In order to do so, please
proceed as follows:
NOTE:
• To install the device on the wall it must be ensured that there is a socket
within reach of the power cable.
• The socket must be within easy reach so that in case of emergency the
mains plug can be quickly removed.
ATTENTION:
• Please ensure that the installation wall is able to support the load
(at least 20 kg).
• Select the screws/rawlplugs accordingly (not supplied).
1. Screw the brackets to the wall at the right distance apart.
2. Then attach the device as shown.
3. Now connect the device to a correctly installed power socket.
14.09.2007 14:45:06 Uhr 14.09.2007 14:45:06 Uhr