1. Manuals
  2. Brands
  3. Directechs Manuals
  4. Automobile Accessories
  5. HKHT1
  6. Installation manual

Directechs HKHT1 Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION GUIDE
HKHT1
Designed by Installers for Installers
© 2020 Directed, Vista CA
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle's
electrical system and components.
2020-03-03
Directed Digital
Solutions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HKHT1 and is the answer not in the manual?

Questions and answers

Related Manuals for Directechs HKHT1

Summary of Contents for Directechs HKHT1

  • Page 1 Directed Digital INSTALLATION GUIDE Solutions HKHT1 Designed by Installers for Installers © 2020 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s electrical system and components.

  • Page 2: Table Of Contents

    Contents Warning! Safety first ........................3 Introduction ............................ 4 Pre-installation and application warnings ..................4 Vehicle application guide ......................5 Wiring connections ......................... 6 Main power harness (H1), 12-pin thick gauge connector ............... 6 Auxiliary output harness (H2), 16-pin black connector ..............6 Analog harness (H3), 18-pin white connector ................

  • Page 3: Warning! Safety First

    Do not allow anyone to stand in front of or behind the vehicle. This product should not be installed in any convertible vehicles, soft or hard top with a manual transmission. Installation in such vehicles may pose certain risk. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 4: Introduction

    (if applicable), bypass interface, and convenience. This guide provides information on the installation of the module using HKHT1. If you would prefer using this system as a digital solution, go to www.directechs.com and search for the make, model and year of the vehicle. This will allow you to find the proper firmware and corresponding installation guide.

  • Page 5: Vehicle Application Guide

    PK: Transponder & Immobilizer Override DL: OE Door Lock & Alarm Controls FOB: Sync CAN Interface w/ FOB Remote RS: Remote Start & Engine Controls SS: Integrated Security & Monitoring ST: Function/Feature Status Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 6: Wiring Connections

    If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay may be necessary. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 7: Analog Harness (H3), 18-Pin White Connector

    If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. The Green wire is only required for starter disable and anti-grind applications. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 8: Installation (Wiring Diagrams & Vehicle Wiring Reference Charts)

    10: Red: (+) 12V (+) 12V cable): Pink (-) Hood Input: Gray: 3 9: Black: (-) Ground Hood Pin 6: Yellow: (+) Siren Output: Brown: 17 Immobilizer Data Interrupt (connector side) Siren Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 9 B-CAN High White/Orange or Brown Data Junction Box (Rear), I/P-G. White B-CAN Low Yellow/Orange or White Data Junction Box (Rear), I/P-G. White EMS COM Blue Data Driver kick panel, EM11. White Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 10 Data OBDII. Black B-CAN High White/Orange Data Junction Box (Rear), I/P-G. White B-CAN Low Yellow/Orange Data Junction Box (Rear), I/P-G. White EMS COM Blue Data Driver kick panel, EM11. White Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 11: Type 2

    (vehicle side) Siren (+) 12V: Green, (+) Ignition: Pink, pin 6 pin 5 Ignition Switch Refer to the Vehicle (white 6-pin connector) wiring reference charts for pin, wire and connector details Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 12 Dash fuse box. White White/Black Factory Alarm Disarm (driver door key double (-) Drivers kick panel. Green unlock) Drivers Door Green Drivers kick panel. Green Brake Red/Orange Dash fuse box. Gray Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 13: Type 3 Without Oem Alarm

    (connector side) (+) Ignition : Siren Blue, pin 6 (+) Starter: White, pin 1 (+) 12V: Orange, pin 5 Ignition Switch (6-pin connector) Refer to the Vehicle wiring reference chart. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 14 White, pin 1 (-) Factory Alarm Arm (+) 12V: Orange, pin 5 (-) Lock Ignition Switch (-) Unlock (6-pin connector) Refer to the Vehicle (-) Factory Alarm Disarm wiring reference chart. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 15 Gray Factory Alarm Disarm Yellow Drivers kick panel. Gray Lock Detection Black/Orange open Drivers kick panel. Gray Trunk Release White Drivers kick panel. Gray Drivers Door Drivers kick panel. Gray Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 16 Factory Alarm Disarm Brown Drivers kick panel. Gray Lock Detection Yellow open Drivers kick panel. Gray Trunk Release Blue/Orange BCM above brake pedal. White Drivers Door BCM above brake pedal. White Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 17 Blue, pin 6 (+) Accessory 2: Yellow, pin 4 15A fuse (+) Accessory Interrupt (+) 12V: Black,pin 5 Refer to the Vehicle (connector side) wiring reference chart. (+) Accessory Interrupt (vehicle side) Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 18: Type

    15A fuse (+) Accessory Interrupt (-) Lock (+) 12V: Black,pin 5 (connector side) (-) Unlock (-) Factory Alarm Disarm Refer to the Vehicle (+) Accessory Interrupt wiring reference chart. (vehicle side) Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 19 Factory Alarm Arm Green/Orange Drivers kick panel. Gray Factory Alarm Disarm Blue/Orange Drivers kick panel. Gray Lock Detection Black/Orange open Drivers kick panel. Gray Drivers Door Green/Orange Drivers kick panel. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 20 Factory Alarm Disarm Gray Drivers kick panel. White Lock Detection Yellow open Drivers kick panel. White Trunk Release Pink Passenger kick panel. White Drivers Door Green Passenger kick panel. White Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 21: Oem Alarm

    (+) 12V: Red, Refer to the Vehicle wiring pin 1 reference charts for wire (+) Ignition: Orange, pin 4 and connector details related to the standard connections in the vehicle. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 22: Oem Alarm

    Refer to the Vehicle wiring reference charts for wire and (+) Ignition: Orange, pin 4 (-) Unlock connector details related to the standard connections in the (-) Factory Alarm Disarm vehicle. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 23 Factory Alarm Disarm Pink Drivers kick panel. White Lock Detection Gray open Drivers kick panel. White Hatch Release Yellow/Black Dash fuse box. White Brake Yellow or Green/Black Brake pedal switch. White Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 24 Factory Alarm Disarm Pink Drivers kick panel. White Lock Detection Gray/Orange open Drivers kick panel. White Power Liftgate Gray/Black Overhead console. White Black or Brake Yellow Drivers kick panel. White Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 25 (vehicle side) (+) Accessory: Orange, pin 2 (+) Starter: White, pin 3 Siren (+) 12V: Green, pin 1 Refer to the Vehicle (+) Ignition: Pink, pin 4 wiring reference chart. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 26: Type 6

    1A Diodes (+) 12V: (-) Factory Alarm Arm Green, (-) Lock pin 1 (+) Ignition: Pink, pin 4 (-) Unlock Refer to the Vehicle (-) Factory Alarm Disarm wiring reference chart. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 27 Drivers kick panel. White Gray/Orange or Factory Alarm Disarm Green/Orange (w/ Drivers kick panel. White BCM) Lock Detection Black/Orange open Drivers kick panel. White Drivers Door Brown/Orange Drivers kick panel. White Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 28: Type 7

    Refer to the Vehicle wiring (+) Ignition: reference charts for wire White/Blue or Blue, and connector details (+) 12V: Black, pin 5 pin 6 related to the standard connections in the vehicle. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 29: Type 10

    (-) Unlock White/Blue or Blue, pin 6 reference charts for wire (+) 12V: Black, pin 5 and connector details (-) Factory Alarm Disarm related to the standard connections in the vehicle. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 30 Drivers kick panel. Gray Lock Detection Black/Orange open Drivers kick panel. Gray Trunk Release White Drivers kick panel. Gray Drivers Door Drivers kick panel. Gray Brake Black Drivers kick panel. Gray Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 31 Drivers kick panel. Gray Lock Detection Brown open Drivers kick panel. Gray Trunk Release Yellow Drivers kick panel. Drivers Door White Dash fuse box. White Brake Green Brake pedal switch. White Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 32 Drivers kick panel. Brown Trunk Release White Drivers kick panel. Brown Drivers Door White Dash fuse box. White Brake Green Brake pedal switch. White Brake Green Brake pedal switch. White Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 33 10: Red: (+) 12V (+) 12V (-) Hood Input: Gray: 3 9: Black: (-) Ground Hood Pin (+) Siren Output: Brown: 17 6: Yellow: Immobilizer Data Interrupt (vehicle side) Siren Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 34 Orange Data OBDII. Black B-CAN High Blue Data Junction Box (Right), JM01. Black B-CAN Low Data Junction Box (Right), JM01. Black EMS COM Blue Data Passenger kick panel, MC11. Yellow Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 35 (6-pin connector) Siren (+) Accessory: (+) Starter: Orange, pin 3 Green, pin 1 (+) Ignition: Blue, pin 6 (+) 12V: White, pin 5 Refer to the Vehicle wiring reference chart. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 36 Drivers kick panel. Blue Unlock Blue Drivers kick panel. Blue Factory Alarm Disarm Pink double (-) Drivers kick panel. Yellow Drivers Door Pink Drivers kick panel. Blue Brake Brake pedal switch. White Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 37 White orOrange, pin 3 (+) Starter: Black/Yellow or White, pin 1 (+) Ignition: White/Blue or Blue, (+) 12V: Black, pin 5 pin 6 Refer to the Vehicle wiring reference chart. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 38 BCM At Left Of Steering Column., top conn. White Lock Green Drivers kick panel. Blue Unlock Orange double (-) Drivers kick panel. Brown Trunk Release White/Black Drivers kick panel Black Brake Drivers kick panel. Black Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 39: Connecting The Module

    Before connecting the Directed Digital Solutions, it is important to ensure that the proper feature and function programming is selected using the configuration wizard. Visit www.directechs.com to use the latest version of the online tool. Flashing a module using your computer: 1.

  • Page 40: Rf Systems

    DO NOT connect the SmartStart 2-pin power harness when using the Directed Digital Solutions. Power and ground will be provided by the D2D connector on main module. Refer to the SmartStart documentation for further details. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 41: Module Programming

    Refer to "LED diagnostics and troubleshooting" on page 45 for more information and for troubleshooting purposes. The HKHT1 firmware has several vehicle connection options available. It is important to choose the programming method associated with your specific installation solution in order to complete successfully the programming of your module.

  • Page 42: Method 2 - Without Ft Can & With Hs Can Connections & With Transponder Immobilizer

    DATA Tach: Firmware using DATA Tach, the tachometer is preprogrammed for the vehicle and no further action is required. For instructions on how to adjust the tach or use Virtual tach, refer to page 48.

  • Page 43: Method 3 - With Hs Can & Ft Can Connections & Without Transponder Immobilizer

    DATA Tach: Firmware using DATA Tach, the tachometer is preprogrammed for the vehicle and no further action is required. For instructions on how to adjust the tach or use Virtual tach, refer to page 48.

  • Page 44: Method 4 - Without Ft Can & With Hs Can Connections & Without Transponder Immobilizer

    DATA Tach: Firmware using DATA Tach, the tachometer is preprogrammed for the vehicle and no further action is required. For instructions on how to adjust the tach or use Virtual tach, refer to page 48.

  • Page 45: Led Diagnostics And Troubleshooting

    External module synchronization Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 46 The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 Analog error codes Description Troubleshooting DEI feature error. A feature config file mismatch was detected. Please contact Technical Support. Flashes red, green & orange Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 47: Soft Reset

    After 3 seconds the LED turns ON solid orange. Keep holding the programming button until & & the LED flashes red, then orange slowly. Solid Hold Flashes Release the programming button. The LED turns ON solid red. & Release Solid Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 48: Learning The Tach (Not Needed With Virtual Tach)

    Important! After successfully learning Virtual Tach, a small minority of vehicle starters may over crank or under crank during remote start. Use the VirtualTach Fine tune feature in the configuration wizard to adjust the starter output time in 50mS increments to compensate for such an occurrence. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 49: Limited Lifetime Consumer Warranty

    This product may be covered by a Guaranteed Protection Plan (“GPP”). See your authorized Directed dealer for details of the plan or call Directed Customer Service at 1-800-876-0800. (920-10011-01 2011-06) Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

  • Page 50: Quick Reference Guide

    Press & hold for 1 second to remote start. * Press & hold for 5 seconds to activate the trunk release (optional). * Icon and remote appearance may differ depending on the model purchased. Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.
  • Page 51 The application enables a “Cloud-Connected Car” like never before, providing 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet. For more information, visit www.mysmartstart.com. Notes Directed Digital Solutions HKHT1 © 2020-03-03 Directed. All rights reserved.

Table of Contents