Q-tran QTM-DRIVE Manual

QTM-DRIVE
QTM-DRIVE is an LED power supply for DMX or DALI control. It is
available in 12 or 24VDC and 60-200 watts of power. The QTM-DRIVE
utilizes eldoLED LINEARdrive drivers and is suitable for indoor use.
The power supplies and modules are all prewired together along
with terminal blocks for power and control wires. The housing can be
recessed or surface mounted.
Part Number Builder
Product
QTM-DRIVE
Technical Information
Size
1
Max Load
Size (Watts)
60W 1x60W
120W 2x60W
100W 1x100W
200W 2x100W
Voltage Drop Chart
Watts
VDC
(W)
12
12 25
60
17
25
24 40
80
100
*Distances are based on a 5% Voltage drop max.
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved
© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
LED POWER SUPPLY 60W–200W
Size
1
60W
100W
120W
200W
Secondary
Voltage Max Prim Amps
(12/24VDC) @ 120V
12VDC 0.60A
12VDC 2.10A
24VDC 1.05A
24VDC 2.10A
10 AWG 12 AWG 14 AWG
(5.6mm2) (3.3mm2) (3.0mm2)
315' 198' 125'
115' 72' 45'
7' 4' 3'
897' 564' 355'
567' 356' 224'
309' 194' 122'
130' 82' 51'
84' 53' 33'
Sec. V
12VDC
24VDC
Color
2
WH White (Standard)
BK
Black Powder Coat Finish
Max Prim Amps
@ 277V
0.45A
0.90A
0.45A
0.90A
16 AWG 18 AWG
(1.3mm2) (0.78mm2)
78' 49'
28' 18'
223' 140'
141' 88'
77' 48'
32' 20'
21' 13'
Control
DMX
DALI
20 AWG 22 AWG 24 AWG
(0.50mm2) (0.33mm2) (0.22mm2)
31' 19' 12'
11' 7' 4'
88' 55' 35'
56' 35' 22'
30' 30' 12'
13' 8' 5'
8' 5' 3'
Specification subject to change. Rev-11-19-20
Color
2
WH (Standard)
BK
26 AWG
(0.13mm2)
7'
4'
22'
14'
7'
3'