Q-tran QTM-eLED+DMX Installation Instructions Manual

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
● DMX Shield must be grounded to Earth Ground at a single point external to power supply
Risk of Fire / Electric Shock
Transformer should be installed by a
Licensed electrician in accordance with
the N.E.C. and all local codes in force.
© 2020, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - sales@q-tran.com - www.q-tran.com
QTM-eLED+DMX
Must be installed by licensed electrician. Must be installed by licensed electrician.
● Installation must be in accordance with DMX512-A standard
QTM-eLED+DMX
Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
This power supply must be installed according to the National Electric
Code and local codes and ordinances.
This power supply is to be installed and serviced only by an licensed electricians.
This power supply is to be installed so that it is not likely to be contacted by people.
To avoid a hazard to children, account for all parts and destroy all packaging materials.
Do not install in wet locations.
LOW VOLTAGE LIGHTING SYSTEM
CLASS: 3425 - 15
COMPLIANT
3425 - 95
2020-04-08-V1