Q-tran QOM-eLED Series Manual

QOM-eLED+DMX
QOM-eLED is Q-Tran's exterior rated surface mounted electronic
DMX power supply, utilizing a 100W constant voltage LED Driver
from Thomas Research and the LINEARdrive DMX decoder from
eldoLED. With the ability to fit up to 300W of power and control in
one enclosure, this unit provides plenty of flexibility and comes with
all decoders prewired together with terminal blocks for landing your
RGB or RGBW wires.
Part Number Builder
Product
QOM-eLED
Technical Information
1 Size
Max Load
Size (Watts)
100W 1x100W
200W 2x100W
300W 3x100W
Voltage Drop Chart
Watts
VDC
(W)
17
25
24 40
80
100
*Distances are based on a 5% Voltage drop max.
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved
© 2020 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Size 1 Prim. V
UNV
UNV
100W
200W
300W
Secondary
Voltage Max Prim Amps
(12/24VDC) @ 120V
24VDC 0.95A
24VDC 1.90A
24VDC 2.85A
10 AWG 12 AWG 14 AWG
(5.6mm2) (3.3mm2) (3.0mm2)
897' 564' 355'
567' 356' 224'
309' 194' 122'
130' 82' 51'
84' 53' 33'
COMPLIANT
LED POWER SUPPLY 100W–300W
Sec. V
24VDC
24VDC
2 Options
BK
Black Powder Coat Finish (Standard)
SS 316 Marine Grade Stainless Steel
Max Prim Amps
@ 277V
0.40A
0.80A
1.20A
16 AWG 18 AWG
(1.3mm2) (0.78mm2)
223' 140'
141' 88'
77' 48'
32' 20'
21' 13'
Control
DMX
DMX
20 AWG 22 AWG 24 AWG
(0.50mm2) (0.33mm2) (0.22mm2)
88' 55' 35'
56' 35' 22'
30' 30' 12'
13' 8' 5'
8' 5' 3'
Specification subject to change. Rev-09-25-20
Opts 2
BK
SS
26 AWG
(0.13mm2)
22'
14'
7'
3'