Q-tran QTM-eLED+DALI-DT6-AN Manual

QTM-eLED+DALI-DT6-AN
LED POWER SUPPLY 100W–200W
The QTM-eLED+DALI-DT6-AN is a powerful LED power supply designed for DALI 2 applications.
It features the 100W constant voltage LED Driver from Thomas Research and DALI 2 DT-6 Decoders,
ensuring exceptional functionality and efficiency. It also incorporates factory-installed Lutron Athena
Wireless Nodes, which streamlines installation time and allows for simple programming using the
Athena iOS or Android app. The power supplies and decoders are prewired together with terminal
blocks for easy installation of power and control wires. Combine Q-Tran lights and power with Athena
Wireless Nodes to create a complete Athena System to take your lighting to greater heights. Available
in 100-200 watt capacity, the QTM-eLED+DALI-DT6-AN can be recess or surface mounted.
See QTM-eLED+DALI-DT6 for power supply without Athena Nodes.
Part Number Builder
Product Size
1
QTM-eLED
NOTE:
100W
DALI-DT6-AN-1,2 is
the quantity of nodes
mounted in the QTM
200W
enclosure. Multiple
Athena nodes allow for
multiple control zones in
one QTM enclosure.
Technical Information
Size
1
Max Load Secondary Voltage
Size
(Watts) (24VDC)
100W 1x100W 24VDC
200W 2x100W 24VDC
Output Wiring: 2-Wire Light Engines
3
SW, SW-HE, SW-HE+, SD-SW, SC, WD
Voltage Drop Chart
10 AWG
Watts
VDC
(W) (5.6mm2)
17
25
24 40
80
100
*Distances are based on a 5% Voltage drop max.
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved
© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Control Output Wiring 1
2
DALI-DT6-AN-1
DALI-DT6-AN-1
DALI-DT6-AN-2
3 Output Wiring
2-Wire Light Engines:
SW, SW-HE, SW-HE+, SD-SW, SC, WD
NOTE:
2-Wire default is 1 address. For customization or pre-programming contact a local
sales rep. DALI commissioning to be performed by a third party at time of installation.
Max Prim Amps @ Max Prim Amps @
120V 277V
0.95A 0.40A
1.90A 0.80A
Color:
4 WH White (Standard)
BK Black Powder Coat Finish
12 AWG 14 AWG
(3.3mm2) (3.0mm2)
897' 564' 355'
567' 356' 224'
309' 194' 122'
130' 82' 51'
84' 53' 33'
Output Wiring 2
3 3
2
N/A
2
Control: DALI-DT6-AN Lutron Athena Node
2
DALI-DT6-AN-1
Total
Wattage
Node 1
100W 100W
200W 200W
NOTE:
DALI-DT6-AN-1: 1 Lutron Athena Node. 1 zone of control for 100-200W. The entire output is controlled as a single zone.
DALI-DT6-AN-2: 2 Lutron Athena Nodes. 2 zones of control for 200W. Each of the two outputs are controlled as independent zones.
DALI-DT6-AN is 2-wire only.
16 AWG 18 AWG
(1.3mm2) (0.78mm2)
223' 140'
141' 88'
77' 48'
32' 20'
21' 13'
COMPLIANT
Prim. V Sec. V
UNV 24VDC
DALI-DT6-AN-2
Node 1 Node 2
- -
100W 100W
20 AWG 22 AWG 24 AWG
(0.50mm2) (0.33mm2) (0.22mm2)
88' 55' 35'
56' 35' 22'
12'
30' 30'
13' 8'
8' 5'
Specification subject to change. Rev-06-15-23
Color
4
WH (Standard)
BK
26 AWG
(0.13mm2)
22'
14'
7'
5' 3'
3'