Advertisement
Quick Links
MAN0960-03-EN
1
Required
Power
3.0 A @ 24VDC
(Steady state)
Primary
Power Range
Relative
Humidity
Clock
Accuracy
Operating
Temp
Storage
Temp
Display Type
7" WVGA TFT (800 nit typical)
Aspect Ratio
Screen
Resolutions
Ladder
Memory
Display
Memory
Display Life
User Keys
5 virtual function keys
Screens
supported
Colors
Weight
3lb 1oz (1.39Kg)
CE / UL
Serial
2 Ports 1 - RS232 & 1 - RS485
Ethernet
USB-A
2 – High Speed 2.0
Removable
Media
CAN
Remote I/O
Video
Audio
__________________________________________________________________________________________________________________________________________________________________________
11/30/2011
HE-ZX452, HE-ZX752 and HE-ZX1152
HE-ZX452
15:9
800x480
1 MB
130 MB
Mic, Line IN, Line Out (Not Active with Current Firmware)
ZX Series OCS
Controller Datasheet
for
Specifications
HE-ZX752
2.75A @ 24VDC
10 – 30 VDC
30 to 90% Non-condensing
+/- 3 min / month
0°C to +45°C
-20°C to +60°C
15" XGA TFT (350 nit typical)
4:3
1024x768
1 MB
130 MB
50,000 hours @ 25°C
7 virtual function keys
1023
65536
11lb 9oz (5.25Kg)
Connectivity
3 Ports 2 - RS232 & 1 - RS485
2 10/100/1000 (1 dedicated for I/O)
Remote I/O, Peer to Peer, PC, Programming...
4 – High Speed 2.0
Supports 2 USB Based Drives
2 Ports (1 dedicated to I/O)
Remote I/O, Peer to Peer, PC, Programming...
SmartStix, SmartBlock, SmartMod or SmartRail
VGA Video Out for Mirrored Display
Specifications / Installation
HE-ZX1152
2.75A @ 24VDC
22" 1080p TFT (300 nit typical)
16:9
1920 x 1080
1 MB
130 MB
7 virtual function keys
18lb 3oz (8.25Kg)
3 Ports 2 - RS232 & 1 - RS485
4 – High Speed 2.0
#1037
Advertisement
Related Manuals for HORNER ZX Series
Summary of Contents for HORNER ZX Series
- Page 1 MAN0960-03-EN Specifications / Installation ZX Series OCS Controller Datasheet HE-ZX452, HE-ZX752 and HE-ZX1152 Specifications HE-ZX452 HE-ZX752 HE-ZX1152 Required Power 3.0 A @ 24VDC 2.75A @ 24VDC 2.75A @ 24VDC (Steady state) Primary 10 – 30 VDC Power Range Relative 30 to 90% Non-condensing...
-
Page 2: Installation
Specifications / Installation Installation 1. Prior to mounting, observe requirements for the panel layout design and spacing/clearances in the OCS ZX Series Manual (MAN0xxx). 2. Cut the host panel. 3. Insert the OCS through the panel cutout (from the front). The gasket material needs to be between the host panel and the OCS. - Page 3 MAN0960-03-EN Specifications / Installation Panel Cut-Out and Dimensions for HE-ZX752 (15”) 12.60” (320mm) Cut Out 10.75 in (273mm) 15.75” 14.49 in 368.0 mm) (400mm) 3.15” (80mm) Note: Max. panel thickness: 5 mm. Refer to the User Manual (MAN0883) for panel box information and a checklist of Note: The tolerance to meet NEMA standards is ±...
- Page 4 MAN0960-03-EN Specifications / Installation Connectors and Ports 4.1 ZX1152 Connectors and Ports 4.2 ZX752 Connectors and Ports 4.3 ZX452 Connectors and Ports A) Mounting Clip Location (on the side of the ZX452) B) Port 1 – RS-232 C) Port 3 – RS-232 D) Port 2 –...
- Page 5 North America: Europe: (0.50 – 0.78 N-m) Tel: 317 916-4274 Tel: +353-21-4321266 Fax: 317 639-4279 Fax: +353-21-4321826 Signal Description Web: http://www.heapg.com Web: http://www.horner-apg.com Ground Frame Ground Email: techsppt@heapg.com Email: tech.support@horner-apg.com Input Power Supply Ground Input Power Supply Voltage __________________________________________________________________________________________________________________________________________________________________________ 11/30/2011 #1037...
- Page 6 Before each use, inspect all cables for breaks or cracks in the insulation. Replace immediately if defective. No part of this publication may be reproduced without the prior agreement and written permission of Horner APG, Inc. Information in this document is subject to change without notice. __________________________________________________________________________________________________________________________________________________________________________ 11/30/2011...