Cdi; Foil Keyboard; System Requirements - Bosch Rexroth IndraControl VDP 16.3 Project Planning Manual

30/57
Display and operating components
6.2.1

CDI

6.2.2 CDI+
6.2.3
6.3

Foil Keyboard

6.3.1

System requirements

Bosch Rexroth AG R911323862_Edition 07
IndraControl VDP 16.3, VDP 40.3, VDP 60.3 Operator Dis‐
Symbol, Display Description
LED
LED green Normal operation
With Y-repeater: This VDP
Power is the active VDP
LED off No supply voltage of 24 V
DC
LED flashing No serial connection to the
green control cabinet PC.
With Y-repeater: This VDP
is not the active VDP.
LED yellow Hard disk access
HDD
LED flashes Warning: SMART analysis
yellow identifies errors
LED off Temperature in safe range
Fan in control cabinet does
Temp not run or runs too slow
LED flashes
red Temperature > 50 °C
LED red
LED off Normal operation
LED red The control cabinet PC is
UPS
currently operating in the
UPS mode. I.e., the supply
voltage is not available!
Tab. 6-1: LEDs for operating and error display on the front panel
Symbol, Display Description
LED
LED green Normal operation
LED off No supply voltage of 24 V
Power
DC
Tab. 6-2: LEDs for operating and error display on the front panel
For the language-independent foil keyboard no language-dependent
keyboard driver is to be installed. The preinstalled English keyboard driver
can also be used for user interfaces of other languages. Therefore, do not
change the delivery settings.
play
Action
–
Check supply voltage!
Check cables
–
Exchange hard disk
–
Check the fan in the control
cabinet PC
Reduce the ambient
temperature!
–
Restore the supply voltage,
initiate a controlled restart of
the control cabinet PC!
Action
–
Check supply voltage!