Before First Use - Progress PV3555 User Manual

Table of Contents

Advertisement

Available languages

Available languages

3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse aid.
Acoustic signals
The acoustic signals operate when the ap-
pliance has a malfunction, when the adjust-
ment of the level of the water softener oc-
curs and when the programme is comple-
ted.
By default, the acoustic signals are on, but
it is possible to deactivate them.
How to deactivate the acoustic signals
1. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode, refer to "Setting and
starting a programme".
2. Press and hold, at the same time, but-
ton
and button
indicators of buttons
start to flash.
3.
Press button
The indicators of buttons
go off.

BEFORE FIRST USE

1. Make sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water
softener. Contact your local water au-
thority to know the water hardness in
your area.
2. Fill the salt container.
Adjusting the water softener
German
degrees
(°dH)
47 - 50
43 - 46
37 - 42
until the
,
and
.
and
Water hardness
French
mmol/l
degrees
(°fH)
84 - 90
8.4. - 9.0
76 - 83
7.6 - 8.3
65 - 75
6.5 - 7.5
The indicator of button
continues to flash.
• The indicator
4.
Press button
goes off, the acoustic signals are
deactivated.
5. Deactivate the appliance to confirm the
setting.
How to activate the acoustic signals
1. Refer to 'How to deactivate the acoustic
signals', step (1) through (3).
2.
Press button
The indicators of buttons
go off.
The indicator of button
continues to flash.
• The indicator
3.
Press button
comes on, the acoustic signals are
active.
4. Deactivate the appliance to confirm the
setting.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the ap-
pliance. Start a programme to remove
them. Do not use detergent and do not
load the baskets.
Clarke
degrees
58 - 63
53 - 57
46 - 52
progress 31
comes on.
. The indicator
,
and
is off.
. The indicator
Water softener
adjustment
Level
10
9
8

Advertisement

Table of Contents
loading

Table of Contents