38 progress
activate the rinse aid dispenser and use
rinse aid together with the combi deter-
gent tablets.
Refer to 'HINTS AND TIPS' for other
possible causes.
How to activate the rinse aid dispenser
1. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode, refer to "Setting and
starting a programme".
2. Press and hold, at the same time, but-
ton
and button
indicators of buttons
start to flash.
TECHNICAL INFORMATION
Dimensions
Electrical connection
Water supply pressure
1)
Water supply
Capacity
Power consumption
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water
supply to decrease energy consumption.
ENVIRONMENT CONCERNS
Recycle the materials with the symbol
Put the packaging in applicable containers
to recycle it.
Help protect the environment and human
health and to recycle waste of electrical and
electronic appliances. Do not dispose
appliances marked with the symbol
3.
4.
5. Press the on/off button to deactivate the
until the
6. Adjust the released quantity of rinse aid.
,
and
7. Fill the rinse aid dispenser.
Width / Height / Depth (mm)
Refer to the rating plate.
Voltage
Frequency
Min. / max. (bar / MPa)
Cold water or hot water
Place settings
Left-on mode
Off-mode
.
the household waste. Return the product to
your local recycling facility or contact your
municipal office.
• Discard correctly the packaging material.
with
Press button
•
The indicators of buttons
go off.
•
The indicator of button
ues to flash.
• The indicator
Press button
comes on. The rinse aid dispenser is
activated.
appliance and to confirm the setting.
2)
Recycle the materials with the symbol
.
.
and
contin-
is off.
. The indicator
596 / 818 - 898 / 555
220-240 V
50 Hz
(0.5 / 0.05 ) / (8 / 0.8 )
max. 60 °C
12
0.99 W
0.10 W