Safety Measures - Vitek VT-1476 CM Manual Instruction

BLENDER SET WITH PROCESSOR
FUNCTION
DESCRIPTION
1. Motor unit
2. On/Pulse button
3. Turbo mode button
4. Speed control
5. Blender attachment
6. Whisk gear head
7. Whisks for beating and mixing liquid
products
8. Bowl for mixing products
9. Lid-gear
10. Motor unit clamping button
11. Lid-gear clamping button
12. Clamps
13. Processor bowl lid
14. Pusher
15. Small pusher /measuring jug
16. Processor bowl
17. Drive shaft
18. Blades
19. Grater-shredding disc
20. Dranic making disc

SAFETY MEASURES

Before using the unit read the instructions
carefully.
• Use the unit only for its intended purpos-
es, as described in the manual.
• Before using the appliance for the first
time make sure that an electricity sup-
ply corresponds to the voltage of current
specified on the housing.
• Use the processor on the flat stable sur-
face.
• Be careful when you hold grater attach-
ments or blades as they have sharp edg-
es.
• Never use the unit outdoors.
• Always unplug the attachment before
cleaning, assembling, replacing the at-
tachments or if you do not use the unit.
• Do not wash the motor unit under water.
• In order to avoid risk of electric shock or
1476.indd 3 1476.indd 3
fire, do not immerse the motor unit into
water or other liquids. If the unit fell into
water:
- do not touch water;
- unplug the unit immediately, only after it
you can take the unit out of water;
- apply to the authorized service center for
check or repair of the unit.
• Do not put the attachments in a dish-
washing machine.
• Do not touch rotating attachments of the
unit, wait until they stop completely.
• Do not leave the operating unit unattend-
ed.
• Provide that hair or clothes edges do not
get into the rotating zone of the blades.
• During operation do not push the prod-
ucts into the lid throat with your fingers or
any other objects. Use only the pusher
for this purpose.
• Firstly remove the attachment with sharp
cutting edges from the bowl and then the
products.
• Use only the attachments supplied with
the unit.
• Before removing the attachment, let the
electromotor stop completely.
• Switch off the processor and take the
plug from the socket, before removing
any attachment.
• Do not overfill the processor bowl and
the bowl for mixing products.
• Loading of products should be per-
formed before switching on the unit.
• Do not mix/beat hot liquids, let them cool
down.
• When processing products, which cre-
ate additional loading on the motor (for
instance, viscous products) we recom-
mend using the unit at high speed in or-
der to avoid stop of the motor during the
operation and its further malfunction.
• Do not use the unit to mix/chop non-food
products.
• Provide that the power cord does not
touch sharp objects or hot surfaces.
3
ENGLISH
25.01.2011 12:48:38 25.01.2011 12:48:38