Vitek VT-1476 CM Manual Instruction page 6

ENGLISH
2. Set the required disc (19) or (20) on the
drive shaft (17).
3. Put the lid (13).
4. Put the gear lid (9) and lock it on the
bowl (17).
5. Put the motor unit (1) on the gear lid (9)
and turn it clockwise until clamping.
6. Use the control (4) to set the required
speed 1-7. To switch on the unit, press
and hold the (2) button. When pressing
Turbo (3) button, the blade will rotate at
maximal speed. During operation hold
the motor unit (1) with one hand, and
the bowl (16) with the other hand.
7. Put the products into the throat of the
lid (13); use the pusher (14) to supply
products. Slightly press the pusher to
supply products.
8. After usage of the unit, take the plug out
of the socket, press the (10) button and,
holding it, disconnect the motor unit (1)
from the lid (9), rotating it anti clock-
wise.
9. Remove the gear lid (9) from the bowl
(16), by pressing the (11) buttons.
10. Remove the chopped products from the
processor bowl (16).
11. Clean, wash and dry all the used details
immediately after operation.
Note:
To process products of small size (di-
ameter) set the pusher (14) into the lid
throat (13), and use the pusher (15) to
supply products.
CLEANING THE UNIT
• Always unplug the unit and switch it off
after operation and before cleaning.
• Clean, wash and dry all the used details
immediately after operation.
• We recommend washing all the remov-
able parts with warm water with a neutral
detergent. You can use a dishwashing
machine to wash metal blades.
• Wipe the motor unit (1) with a damp cloth.
1476.indd 6 1476.indd 6
Do not use hard sponges, abrasives, ag-
gressive cleaners, as well as solvents.
• Do not immerse the motor unit (1) into
water or wash it under water.
• While possessing products with strong
dyeing properties (for instance carrot
or beet-root) the attachments can get
colored, wipe the attachments using a
cloth, dampened in plant oil.
• Do not wash the attachments if they are
on the motor unit (1), firstly remove the
attachments from the motor unit and
then wash them.
STORAGE
• Before taking the unit away, make sure
that the unit is unplugged.
• Perform the requirements of the CLEAN-
ING THE UNIT section.
• Keep the unit in a dry clean place.
Technical specifications
Power supply: 220-240 V ~ 50 Hz
Maximal power consumption: 700 W
Capacity of plastic bowl of the chopper: 1,5 l
Measuring jug capacity: 800 ml
Specifications subject to change without
prior notice.
Service life of appliance - 3 years
GUARANTEE
Details regarding guarantee conditions can
be obtained from the dealer from whom
the appliance was purchased. The bill of
sale or receipt must be produced when
making any claim under the terms of this
guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC
and to the Law Voltage Regulation
(73/23 EEC)
6
25.01.2011 12:48:38 25.01.2011 12:48:38