Clock Functions - Zanussi ZPCNA4K1 User Manual

Heating function
Moist Baking
NOTES ON: MOIST BAKING
This function was used to comply with the energy
efficiency class and ecodesign requirements
according to EU 65/2014 and EU 66/2014. Tests
according to EN 60350-1.
The oven door should be closed during cooking so
that the function is not interrupted and the oven
operates with the highest energy efficiency
possible.

CLOCK FUNCTIONS

CLOCK FUNCTIONS
Clock function
Time of Day
Duration
End Time
Time Delay
Minute Minder
HOW TO SET: CLOCK FUNCTIONS
- flashes when you connect the oven to the electrical supply, when there was a power cut or when
the timer is not set.
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
This function is designed to save energy during cooking. When you use this
function, the temperature in the cavity may differ from the set temperature. The
heating power may be reduced. For more information refer to "Daily Use" chap-
ter, Notes on: Moist Baking.
To set, change or check the time of day.
Only the top oven works without the set time.
To set how long the oven works.
The function works only for the main oven.
To set when the oven turns off.
The function works only for the main oven.
To combine functions: Duration and End Time.
The function works only for the main oven.
To set a countdown. This function has no effect on the operation of
the oven. You can set this function at any time, also when the oven
is off.
How to set: Time of Day
Application
When you use this function the lamp automatically
turns off.
For the cooking instructions refer to "Hints and tips"
chapter, Moist Baking. For general energy saving
recommendations refer to "Energy Efficiency"
chapter, Energy Saving.
Application
9