Brother DCP-7045N Network User's Manual page 66

g
You can configure the POP3/SMTP settings on this page.
Note
• You can also change the SMTP port number using Web Based Management. This is useful if your ISP
(Internet Service Provider) implements the "Outbound Port 25 Blocking (OP25B)" service, and you are not
using the ISP's SMTP server. By changing the SMTP port number to a specific number which your SMTP
server decide (for example, port 587), you will be able to send E-mail via the SMTP server. You will also
need to check SMTP-AUTH of SMTP Server Authentication Method to enable the SMTP server
authentication.
• If you can use both POP before SMTP and SMTP-AUTH, we recommend choosing SMTP-AUTH.
• If you choose POP before SMTP for the SMTP Server Authentication Method, you need to configure the
POP3 settings. You can also use the APOP method.
• For more information, see the Help text in the Web Based Management.
• You can also confirm whether the E-mail settings are correct after configuration by sending a test E-mail.
h
After configuring, click Submit. The Test E-mail Send Configuration dialog appears.
i
Follow the instructions on-screen if you want to test with the current settings.
Security features
9
58