Brother DCP-7045N Network User's Manual page 33

APIPA
The setting of On will cause the print server to automatically allocate a Link-Local IP address in the range
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the BOOT
Method you have set (see BOOT Method on page 18). Choosing Off means the IP address doesn't change,
when the print server cannot obtain an IP address through the BOOT Method you have set.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
Press a or b to choose TCP/IP.
Press OK.
d
Press a or b to choose APIPA.
Press OK.
e
Press a or b to choose On or Off.
Press OK.
f
Press Stop/Exit.
IPv6
This machine is compatible with IPv6, the next generation internet protocol. If you want to use the IPv6
protocol, choose On. The default setting for IPv6 is Off. For more information on the IPv6 protocol, visit
http://solutions.brother.com/.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
Press a or b to choose TCP/IP.
Press OK.
d
Press a or b to choose IPv6.
Press OK.
e
Press a or b to choose On or Off.
Press OK.
f
Press Stop/Exit.
Control panel setup
3
3
3
25