Restoring The Network Settings To Factory Default - Brother DCP-7045N Network User's Manual

Restoring the network settings to factory default

If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all network settings to the factory default.
a
Press Menu.
b
Press a or b to choose LAN.
Press OK.
c
Press a or b to choose Factory Reset.
Press OK.
d
(For MFC-7440N)
Press 1 to choose Reset.
(For DCP-7045N)
Press a to choose Reset.
e
(For MFC-7440N)
Press 1 to choose Yes for reboot.
(For DCP-7045N)
Press a to choose Yes for reboot.
f
The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.
Control panel setup
3
3
27