Table of Contents
Advertisement
4.0
Technical Parameters
1.Model：MS3
3.Weight：270±5 kg
A．Parameter of Manual Dispenser
Dispensing Speed：20rpm
Canister's Volume：2.3L
Min Dispensing Quantity：1/384Y （0.077ml）
Max Dispensing Quantity：2Y （59.14ml）
No. of Canisters：12/16/18/20/24/26Canisters
Gauge：Optional
5.0 Installation
The
shaker
and
assembly are fully assembled
before leaving factory. Please
assemble
the
follows:
1. Unpack the crate carefully.
2. Remove the tools from the crate's base.
3. Remove the steel rod at the base of the MS3 (see Figure 5.1) and the four feet clamps.
Reinstall the steel rods whenever transporting the MS3.
4. To move the MS3, raise the feet by turning them in an anti-clockwise (see Figure 5.2) .
5. Once the MS3 is moved to its final location (must be a flat hard surface), turn the feet in
the clockwise direction until all 4 feet are touching the ground and the MS3 is secure and
stable..
6. Rotate the turntable and install the left canisters one by one (see Figure 5.3 and 5.4)
Once all canisters are installed, the installation is finished.
2.Shape Size：762X800X1443mm
4.Power Supply：On Name Plate
turntable
canisters
as
B．Parameter of Automatic Shaker
Shaking Time：60/180/300 Seconds(Optional）
Shaking Frequency：680-720rpm
Load Capacity Available：1-20L
Load Weights Available：1-35kgs
Load Can Height Available：50-390mm
（Figure 5.1）
- 5 -
Advertisement
Table of Contents
