Preface; General Safety Instructions - Santint MS3 Manual

1.0 Preface

Thanks for purchasing the Santint Manual Dispenser!
This user's manual provides general information on unpacking, installation, usage and
maintenance of the manual dispenser. Any improper use will shorten its longevity.
Read this manual completely and carefully before installation, use and maintenance of
the machine. The manual should be kept in a convenient place for future reference.
For any questions, please do not hesitate to contact our service team.

2.0 General Safety Instructions

1. Warning Labels:
Electricity danger! Please unplug before cleaning and repairing.
（Remark：No need to switch off the power supply before repairing the canisters
assembly.）
Important notice! Please read it carefully.
2. The machine must be placed in a well-ventilated working site. Otherwise an aerator
must be provided.
3. The applicable power cord: refer to the nameplate in the rear. Make sure the power
cord is well grounded to ensure safety.
4. Do not lengthen the power cord as to avoid malfunction or injury.
5. Unplug the MS3 if it is not in use for extended periods of time.
6. When the MS3 needs to be transported to a new site, please secure it by re-inserting
the steel rod through the base and re-install the four feet clamps. The turntable must
be locked by the locking pole so that it is secure. The canisters should be dismantled,
cleaned out and then packed into the cartons.
7. The shaker is compatible with paint cans ranging from 1 liter to 18 liters with a max
weight of 35kg.
8. Do not operate or store in a flammable and explosive environment.
9. The sound level is Decibels:≤75dB(A) measured from 1.6m away from the front,
back, left, right and above of the machine (see Figure 2.1).
- 2 -