Power Fist 8536609 User Manual page 3

8536609
a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved
dust mask or respirator when working around metal, wood, and chemical dusts and mists.
9. Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines. Keep hands and fingers clear of the Roll Dies when operating.
10. Maintain tools with care. Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories. Inspect tool cords
periodically and, if damaged, have them repaired by an authorized technician. The
handle must be kept clean, dry, and free from oil and grease at all times.
11. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are
removed from the tool or machine work surface before plugging it in.
12. Stay alert. Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
13. Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a qualified technician. Do
not use the tool if any switch does not turn on and off properly.
14. Replacement parts and accessories. When servicing, use only identical replacement
parts. Use of any other parts will void the warranty. Only use accessories intended for
use with this tool.
15. Do not operate tool if under the influence of alcohol or drugs. Read warning labels
if taking prescription medicine to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
16. Maintenance. For your safety, service and maintenance should be performed regularly
by a qualified technician.
17. Workpiece may be sharp. After bending or cutting workpieces use caution. Be aware
of sharp edges or sharp shreds of metal that may be created. Use heavy duty gloves
when handling the workpiece.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
FEATURES
1. This precision Pipe/Tube Notcher is a useful fixture for your drill press, allowing you to
make round cuts in pipes and tubing of various shapes at any angle from 0° to 45° .
2. Sturdy and durable steel frame holds your workpieces rigid during operation.
3. Adjustable Angle Joint Plate (17#) is adaptable to any worktable, and is especially suited to
be mounted on drill
4. The Adjustable Angle Joint Plate (17#) may be swiveled and rotated, which in conjunction
with the adjustable holder
Visit www.princessauto.com for more information
Pipe/Tube Notcher
press tables.
makes cutting compound angles very easy.
3