Adjusting inflation
7
pressure
Compare the TCP/RDC value in
84
the multifunction display with the
value on the back cover of the
Rider's Manual. The difference
between the two values must
be compensated with the tire
inflation pressure tester at the
filling station.
Example: according to the
Rider's Manual, the tire inflation
pressure is to be 36 psi (2.5 bar),
however 33 psi (2.3 bar) is
shown in the multifunction
display. It is low by 3 psi
z
(0.2 bar).
The tester at the filling station
indicates 34.8 psi (2.4 bar). This
value must be increased by 3 psi
(0.2 bar) to 37.8 psi (2.6 bar) in
order to produce the correct tire
inflation pressure.