BMW C 650 GT Rider's Manual page 103

ATTENTION
Front wheel installation op-
posite the running direction
Accident hazard
Observe running direction ar-
rows on tire or rim.
Roll front wheel into front
suspension.
Lift front wheel and install
quick-release axle 2 with
torque.
Quick-release axle in axle
mount
22 lb/ft (30 Nm)
Tighten clamping screws 1 to
specified torque.
Clamping screws (quick-
release axle) in tele-
scopic forks
Tightening sequence: Tighten
the screws 6 times, alternating
between one and the other
each time
6 lb/ft (8 Nm)
Remove front wheel stand.
Slide the brake calipers onto
the brake rotors.
Install screws 2 on left and
right with appropriate torque.
Brake caliper on fork leg
21 lb/ft (28 Nm)
ATTENTION
Contact between the wheel
speed sensor cable and the
brake disc
8
101
z